Table of Contents
Advertisement
[Print Job Confirmation Screen]
Set whether or not to display a print confirmation screen for deletion of the print files
stored in the device after printing. When [Disabled] is selected, print files stored in the
device are automatically deleted after printing.
[Preview Generation]
Set whether or not to generate preview images when displaying the file list of stored print
jobs (Charge Print, Secure Print, Sample Set, Delayed Print, or Private Charge Print).
Note
This setting can also be set from the printer driver. When the two settings between the driver and the device
are different, the setting of the printer driver will take precedence.
[Duration for Preview Generation]
Set whether or not to restrict time to generate a preview image of the print files. When you
select [Limited], only the preview images generated within the specified duration are
displayed. In the case of exceeding the time limit, no preview image will be generated.
[Minimum Passcode Length for Stored Jobs]
Set the minimum number of allowed passcode digits. A passcode is required when Secure
Print or Private Charge Print files are to be stored or printed.
Note
Specify "0" if you do not set passcodes or the minimum number of digits.
[Print Order for All Selected Files]
Specify the printing order when you select to print all print files stored.
[Other Settings]
You can configure other settings related to the paper used in the printer.
[Print Area]
Set whether or not to expand the print area.
Reference
For more information about the printable area, refer to "Printable Area" (P.478).
For more information about expanding the printable area, refer to "Extended Printable Area" (P.478).
[Substitute Tray]
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select the paper size.
Note
When documents are printed using emulation such as ESC/P-K and HP-GL/2, the substitute tray setting is not
valid and a message prompting you to load paper displayed on the screen.
The specification from the client overrides this setting.
[Display Message]
Does not use a substitute tray, but displays a paper loading message.
[Use Larger Size]
Switches to the next larger size of paper than previously selected and prints at the same
magnification.
[App Settings]
271
Advertisement
Table of Contents
