Table of Contents
Advertisement
13 Advanced Settings
[Banner Page Tray]
Select a paper tray used for banner sheets.
You cannot apply this setting to Tray 5 (Bypass).
[PostScript Default Color]
Set the default value for PostScript output color.
[PostScript Paper Supply]
Select whether the PostScript Deferred Media Selection feature is enabled or disabled when
the paper tray is selected. Select [Auto Select] to enable the PostScript Deferred Media
Selection feature, or [Select Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note
Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when [Use
Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.
[PostScript Font Absence]
Set an action to take when a PostScript font specified in a job is not present. Selecting
[Substitute Font and Print] substitutes the font to Courier when the specified font is not
found.
[PostScript Font Substitution]
Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not
present.
[XPS Print Ticket Processing]
Set how the device processes the print tickets written in XPS (XML Paper Specification)
documents.
[Off]
Does not process print tickets.
[Standard Mode]
Uses the standard mode to process print tickets.
[Compatible Mode]
Uses the Microsoft-compliant mode to process print tickets.
[LPD Print Queue]
Set the LPD print sequence.
Note
If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically be
changed. For more information on Receiving Buffer - LPD Spool, refer to "[Receiving Buffer - LPD]" (P.270).
[Print Upon Receipt]
Prints jobs immediately after receiving the jobs.
Important
This setting is valid only when [Receiving Buffer - LPD] is set to [Spool]. When any other option is selected,
printing is performed in [Data Processing Order].
274
Advertisement
Table of Contents
