Fuji Xerox ApeosPort-VII C4421 User Manual page 499


Document: Auto, Coordinate Origin: 0 Degrees, Scaling Mode: Active Coordinate
Area, Scaling: ON
Active
Coordinate Area determined
by entered data

Document: Auto, Coordinate Origin: 0 Degrees, Scaling Mode: Active Coordinate
Area, Scaling: OFF
Active Coordinate Area
determined by entered data
Setting Menu Item Related to the HP-GL/2 Mode
 [Port Settings]
Set the port used in emulation modes under [Device] >[Connectivity & Network Setup] >
[Port Settings].
 Port Status (LPD/IPP/USB-/Port 9100)
Enables the ports to be used in the emulation mode.
 [USB - Print Mode]
Sets the print mode of the USB port so that it can be used by HP-GL/2 emulation. Select
[HP-GL/2] as the print mode.
Note

[USB - Print Mode] sets the method of processing data received from host interfaces. If this is set to [HP-GL/2]
here, the device will not switch languages automatically as described in "Switching between Printer
Languages" (P.479).
 The print mode can also be specified for each protocol (LPD, IPP, Port 9100, or WSD) from CentreWare
Internet Services.
Emulation
Print Area
Paper Size
Print Area
Paper Size
499