Fuji Xerox ApeosPort-VII C4421 User Manual page 38

2 Setup
2
[Custom Installation] > [Driver]
You can select and install only the drivers that you need. The following drivers can be
installed:
 PCL Driver
 PS Driver
 Common Print Driver
Reference

For how to install, refer to "Installing with [Custom Installation]" (P.39).
3
[Custom Installation] > [Software]
You can select and install only the software that you need. The following software can be
installed:
 Document Monitor
 TIFF Viewer
 ContentsBridge Utility
 Network Scanner Utility 3
Reference

For how to install, refer to "Installing with [Custom Installation]" (P.39).
4
[Support Tools] > [Create Driver Setup Disk]
You can create a setup disk for the drivers. Using the setup disk reduces the amount of work
required when installing drivers on multiple computers with the same settings.
Note

The setup disk cannot be used on a computer that has a different operating system than the computer that
the setup disk was created on. Create a separate setup disk for each of the operating systems.
5
[Media Information]
You can view the contents in the "Software/Product Manual" disc.
6
[Model-specific Manual]
You can display the User Guide (this manual).
Installing with [Quick Setup]
Note

Perform the following procedure in advance, and then start installing.

"Using the Ethernet Interface" (P.35)

"Using the USB Interface" (P.35)
 "Connecting with Wireless LAN" (P.36)
1
Insert the "Software/Product Manual" disc into your computer.
Note
 If the "Software/Product Manual" disc does not start, perform the following.
1. Right-click the Start button, and then click [Run].
2. Enter "D:\Launcher.exe" ("D" is the drive letter of the optical drive), and then click [OK].
2
Click [Quick Setup].
38