Fuji Xerox ApeosPort-VII C4421 User Manual page 24

1 Before Using the Device
No. Component
1 Power button
2 Control panel
3 IC Card Reader (optional)
4 Toner cartridges
5 Front cover
6 Tray 5 (bypass tray)
7 Paper tray
8 Side cover
9 Waste toner container
10 Drum cartridges
11 Output tray
12 Document glass
13 Document cover
14 Duplex Automatic
Document Feeder
24
Switches the power of the device on and off.
Reference

Refer to "Power Source" (P.32).
Consists of operation buttons, LED indicators, and the touch screen.
Reference

Refer to "Control Panel" (P.27).
Used to authenticate a user using a smart card. When you touch the
smart card to the IC Card Reader, the device reads the user information
registered on the smart card and authenticates the user.
Note
 When the device is in the Power Saver mode, touching the smart card to the IC
Card Reader deactivates the Power Saver mode. However, this operation does
not deactivate the Sleep mode. For more information, refer to "Exiting the
Power Saver Mode" (P.64).
Contains toners.
Open this cover to replace consumable and clean the device.
Used for loading non-standard paper, such as thick-stock paper and other
special media, that cannot be loaded in the standard trays.
Load paper here.
Note

Tray 2, 3, 4 are optional.
Open this cover to replace consumable and clean the device.
Collects waste toner.
Contains photoconductors.
Copies and prints are delivered here.
Load an original here.
Holds an original in place.
Load originals here.
Reference
 Refer to "Document Feeder" (P.26).
Function