Fuji Xerox ApeosPort-VII C4421 User Manual page 48

2 Setup
Disconnecting the Device from the Mobile Device Menu
1
Open the Wi-Fi settings screen on your mobile device and turn off the Wi-Fi.
 When "Auto Join" of the mobile device is enabled:
The mobile device reconnects to the Wi-Fi Direct of the device automatically even if the
Wi-Fi connection is disconnected. When the number of connections reaches the upper
limit due to this automatic connection, disable the "Auto Join" on your mobile device or
proceed to step 2.
 When "Auto Join" of the mobile device is disabled:
The Wi-Fi connection is canceled until you reconnect from the Wi-Fi settings screen on
your mobile device.
Note
 "Auto Join" cannot be switched depending on the mobile device.
2
Open the Wi-Fi settings screen on your mobile device and select the SSID of the device in
connection. Forget the Wi-Fi settings information saved on your mobile device.
Note

When you reconnect the disconnected mobile device to the device, select the new SSID and enter the
passphrase on the Wi-Fi settings screen on your mobile device.
48