Switching The Power Off - Fuji Xerox ApeosPort-VII C4421 User Manual

Switching the Power Off

1
Before switching the power off, make sure that the device has completed all copy or print
jobs. Then, make sure that the Data LED does not blink.
Important
 Do not switch the power off in the following situations. If the power is switched off, the processing data may
be erased.

While data is being received

While a job is being printed
 While a job is being copied
 While a job is being scanned

When switching the power off, wait 5 seconds after outputs have been delivered.
2
Press the Power button and select [Power Off Device] to turn off the device.
 ApeosPort-VII C4421
 ApoesPort-VII C3321
Important

Power off processing is performed internally on the device for a while after the power is switched off.
Therefore, do not perform other operation immediately after switching the power off.
Note
 When powering the device on after it has been switched off, wait until the flash of the Power button ends
after the touch screen has gone dark.
 You can set the device to be switched off automatically at the same time every day. For more information,
refer to Scheduled Power Off.
Power Source
33