Table of Contents
Advertisement
13 Advanced Settings
[Use Closest Size]
Switches to the closest size of paper to previously selected and prints. If necessary, the
image is automatically reduced in size on the paper.
[Use Closest Size (No Reduce)]
Switches to the closest size of paper to currently selected and prints.
The image size will not reduce even if the entire image is not printed.
[Select Tray 5]
Prints using the paper loaded in Tray 5. When the size of the loaded paper is different from
the setting, a message to prompt you to load the selected size paper.
[Switch Size Series]
Switches between the AB series paper and the inch series paper to print.
The following combinations are available.
A5 and 5.5 × 8.5"
A4 and Letter (8.5 × 11")
[Paper Type Mismatch]
Set an action to take when the paper type loaded in the paper tray does not match the
paper type specified when a print job is submitted.
[Print]
Prints using the paper loaded in the tray.
[Display Confirmation Screen]
A confirmation screen appears to ask whether or not to print the job.
If a paper type mismatch occurs during printing, the device ignores the paper type
specified and prints the job in accordance with [Priority], [Paper Size], or [Substitute Tray].
[Display Paper Supply Screen]
Load another type of paper in the selected tray by following the message displayed on the
touch screen, and then tap the [Start] button. The device changes the paper type setting
for the tray and prints the job.
Important
The device keeps the changed paper type setting after printing.
Even if you tap the [Start] button without loading another type of paper in the selected tray, the device
considers the paper type has been changed and prints the job. Consequently, the print quality cannot be
guaranteed because the paper type loaded in the paper tray does not match the paper type specified.
[Prioritize Bypass Tray]
Set whether or not to supply paper from the Tray 5 (Bypass) when the loaded paper
accommodates for the specified print job.
Note
When the paper size and type specified for the print job matches the loaded paper, Tray 5 (Bypass) will be
used.
[Check Type and Size for Bypass]
Set whether or not to display the screen to confirm which paper is loaded when using Tray 5
(Bypass).
272
Advertisement
Table of Contents
