[Print Settings] - Fuji Xerox ApeosPort-VII C4421 User Manual

 [ID Card Copy - Reduce / Enlarge]
Set the copy magnification ratio when to copy ID cards.
Note
 The device may copy an ID card in a different orientation from the original orientation depending on the
magnification ratio you specified.
 [Background Suppression Level (Photo&Text)]
Set the background suppression level for color copying. This setting is valid when [Photo &
Text] is selected for [Original Type]. The larger the value, the stronger the effect of
removing background noise.
 [Background Suppression Level (Text)]
Set the background suppression level for color copying. This setting is valid when [Text] is
selected for [Original Type].
The larger the value, the stronger the effect of removing background noise.
 [Original Type - See-Through Paper]
When [Text] is selected for [Original Type], set whether to display [See-Through Paper].
 [Maximum Number of Sets]
Set the maximum number of allowed sets to copy. Users will not be able to specify a larger
number of sets to copy than the value set here.
 [Image Rotation - Direction]
If the orientation of the paper currently loaded in the tray differs from that of the loaded
original, set a reference position for image rotation to copy in the same orientation.
[Reduce / Enlarge Presets]
Set the magnifications displayed as [Proportional %] under [Reduce / Enlarge].
You can assign any magnification to the Reduce/Enlarge Preset buttons other than [100%]
and [Auto %].
[Custom Colors]
Set the custom colors used for [Single Color] and [Dual Color] in the [Output Color] screen.

[Print Settings]

In [Print Settings], you can configure settings related to the Print feature.
[Allocate Memory]
For each interface, set the memory capacity of the receiving buffer (temporary storage for
data sent from the client).
You can change the receiving buffer capacity according to its use and purpose. Increasing
the receiving buffer capacity may allow a client to be released sooner from an interface.
Important

If you change the memory capacity, the memory is reset, thus all data stored in memory area is erased.
 You cannot allocate more memory beyond its memory capacity. When you turn the device on, and the size
set exceeds the total memory size, the system automatically adjusts the memory size.
[App Settings]
269