Fuji Xerox ApeosPort-VII C4421 User Manual page 497

Document
A0
Size
A1
A2
A3
A4
A5
If the origin position of the plotting position is Layout, the document is placed and drawn in
the center.
If the origin position is bottom left or center, the origin of the document and the paper are
aligned and drawn.

If the Document Size is Auto and the Scaling Mode is ACA
The hard clip setting is inactive. The hard clip area is always the advanced hard clip area.
The scaling factor is determined according to the ACA and the paper size. The range for the
ACA for each paper size is as follows:
Paper
Size
Min Value
P2x - P2y -
P1x P1y
A4 5485 3828
A5 3828 2648
B5 4723 3297
The maximum scaling factor is 210% of the advanced hard clip area for each paper size
and the minimum scaling factor is 22.5%.
Paper Size
A4 A5
25 100
35 25
50 35
71 50
100 71
100 100
0 Degrees
Max Value
P2x - P2y -
P1x P1y
51200 35733
35733 24720
44088 30773
B5
100
31
43
61
87
100
Unit: Percent (%)
90 Degrees
Min Value Max Value
P2x - P2y - P2x -
P1x P1y P1x
3828 5485 35733
2648 3828 44088
3297 4723 30773
Unit: Plotter Unit
Emulation
P2y -
P1y
51200
35733
44088
497