Table of Contents
Advertisement
[Manual Send / Receive Default]
When on-hook or off-hook is used when sending a fax, select either [Manual Receive] or
[Manual Send].
[Fax Receiving Mode]
Select whether or not to receive a fax automatically or manually.
[Border Limit]
Set the length to make a page break that will be applied when the length of a received fax
document is longer than the paper length.
This setting can conveniently be used together with the following Auto Reduce on Receipt
feature.
[Auto Reduce On Receipt]
When the length of a received fax document exceeds the paper length but is within the
page break threshold value, select whether or not to automatically reduce the image to fit
the page.
This setting can conveniently be used together with the Border Limit feature. If you clear
the check mark, the part of the image beyond the paper length is ignored.
[Receiving Paper Size]
Set the method of notifying the paper size on which the received fax document will be
printed, from the receiver to the sender.
[Tray Mode]
Specify the paper tray for printing the received fax document. Only the specified paper tray
will be used for printing the received document. Multiple paper trays can be specified
except for Tray 5. If the fax document cannot be printed on the paper loaded in the
specified paper trays, the device displays a message stating that it will be printed on the
paper loaded in Tray 5. Load paper in Tray 5 and select [Resume] to print the document. To
cancel printing, select [Delete].
[User Mode]
Specify the paper sizes to use for printing received fax documents. Regardless of whether
the paper is loaded in the trays, only the specified size paper is used for printing. You can
select one or more paper sizes.
[2 Pages per Side On Receipt]
Set whether or not to print two pages of a fax document on one side of a sheet. This is
convenient for saving paper.
For example, when two A5 pages are received, they are printed on a single A4 sheet.
However, if paper of the same paper size as the received document is specified in [Receiving
Paper Size], it is printed on the specified size of paper. Depending on the sizes of the
received document, this composite print function may not work.
[2 Sided Printing]
Set whether or not to print received fax documents as 2 sided. This is convenient for saving
paper.
Note
Even if a check mark is put, the printing may result in 1 sided due to data.
[App Settings]
285
Advertisement
Table of Contents
