Required Tools For Installing The Srx1400 Services Gateway; Installation - Juniper SRX1400 Hardware Manual

Related
Documentation

Required Tools for Installing the SRX1400 Services Gateway

Related
Documentation
Preparing the SRX1400 Services Gateway for Rack-Mount or Cabinet Installation
Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
Installing the Mounting Hardware for the SRX1400 Services Gateway on page 54
Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
on page 55
Installing the SRX1400 Services Gateway in a Rack or Cabinet Manually on page 58
To install the services gateway, you need the following tools:
Mechanical lift (if you are installing the device using a mechanical lift)
Phillips (+) screwdriver, number 2
Preparing the SRX1400 Services Gateway for Rack-Mount or Cabinet Installation on
page 53
Installing the Mounting Hardware for the SRX1400 Services Gateway on page 54
Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
on page 55
Removing Components from the Chassis for Manual Lifting of the SRX1400 Services
Gateway on page 59
Lifting the SRX1400 Services Gateway Chassis into a Rack on page 60
Reinstalling Components into the SRX1400 Services Gateway Chassis on page 62
Before you begin the installation, verify the following:
Your site has been properly prepared for the device. See "Site Preparation Checklist
for the SRX1400 Services Gateway" on page 41 for a summary of the tasks you need
to perform.
The device has been removed from the shipping container. See "Unpacking the SRX1400
Services Gateway" on page 47.
You have read the safety information in "Chassis Lifting Guidelines" on page 151.
Ensure the rack is in its permanent location and is secured to the building. Ensure that
the installation site allows adequate clearance for both airflow and maintenance. For
details, see "Clearance Requirements for Airflow and Hardware Maintenance of the
SRX1400 Services Gateway" on page 46.
Required Tools for Installing the SRX1400 Services Gateway on page 53
Installing the Mounting Hardware for the SRX1400 Services Gateway on page 54
Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
on page 55
Chapter 5: Installing the SRX1400 Services Gateway
53