Juniper SRX1400 Hardware Manual page 131

Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
NOTE: If the SRX1400 Services Gateway is not powering on and the power
supply LED is blinking, press the Power button to power on the device.
If you cannot determine the cause of the problem or need additional assistance while
troubleshooting a services gateway, open a support case using the Case Manager link
at:
http://www.juniper.net/support/
or 1-408-745-9500.
SRX1400 Services Gateway AC Power Supply on page 33
SRX1400 Services Gateway DC Power Supply on page 35
Replacing an AC Power Supply on the SRX1400 Services Gateway on page 132
Replacing AC Power Supply Cables on the SRX1400 Services Gateway on page 134
Replacing a DC Power Supply on the SRX1400 Services Gateway on page 135
Replacing DC Power Supply Cables on the SRX1400 Services Gateway on page 138
Chapter 12: Troubleshooting the SRX1400 Services Gateway
, or call 1-888-314-JTAC (within the United States)
111