Unpacking The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide
Related
Documentation
50
NOTE: If you are planning to use Network Processing Card (NPC) and Services
Processing Card (SPC) (supported on SRX3000 Series Services Gateway)
on the SRX1400 device, then you must order them separately. For more
details on NPC and SPC, see "SRX3000 Series Services Gateway Cards
Supported on SRX1400 Services Gateway" on page 209.
You can use NPC and SPC on the SRX1400 device in place of the NSPC.
To install the NPC and SPC on the SRX1400 Services Gateway, you must
order the double wide tray holder (SRX1K3K-2CFM-TRAY) to hold two
single-wide CFMs (NPC and SPC) separately. Contact your Juniper Networks
customer service representative for more information.
Table 31: Accessory Box Parts List
Part
Rack mount kit
RJ-45-to-DB-9 cable to connect the device through the
serial port
Juniper Networks Product Warranty
End User License Agreement
SRX1400 Services Gateway Getting Started Guide
Documentation Information Card
Product Registration
Juniper Compliance Form Letter; Reduction of Hazardous
Substances (RoHS)
Document sleeve
ESD wrist strap with cable
Installation Overview for the SRX1400 Services Gateway on page 51
Site Preparation Checklist for the SRX1400 Services Gateway on page 41
Required Tools and Parts for Unpacking the SRX1400 Services Gateway on page 47
Unpacking the SRX1400 Services Gateway on page 47
Quantity
1
1
1
1
1
1
1
1
1
1
Copyright © 2011, Juniper Networks, Inc.