Srx1400 Services Gateway Installation Safety Guidelines And Warnings; Chassis Lifting Guidelines - Juniper SRX1400 Hardware Manual

Related
Documentation

SRX1400 Services Gateway Installation Safety Guidelines and Warnings

Chassis Lifting Guidelines

Copyright © 2011, Juniper Networks, Inc.
In addition, in minute amounts of moisture, monoammonium phosphate can become
highly corrosive and corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks services gateway. If a dry
chemical fire extinguisher is used, the unit is no longer eligible for coverage
under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
SRX1400 Services Gateway Definition of Safety Warning Levels on page 143
SRX1400 Services Gateway General Safety Guidelines and Warnings on page 145
Preventing Electrostatic Discharge Damage to the SRX1400 Services Gateway on
page 149
This topic includes the following sections:
Chassis Lifting Guidelines on page 151
Installation Instructions Warning on page 152
Rack-Mounting Requirements and Warnings on page 153
Ramp Warning on page 156
The weight of a fully configured chassis is about 42.54 lb (19.3 kg). Observe the following
guidelines for lifting and moving the services gateway:
Before moving the services gateway, read the guidelines in the following topics to verify
that the intended site meets the specified power, environmental, and clearance
requirements:
Site Preparation Checklist for the SRX1400 Services Gateway on page 41
SRX1400 Services Gateway Cabinet Requirements on page 43
SRX1400 Services Gateway Rack Requirements on page 43
Appendix A: Safety and Regulatory Compliance Information
151