Juniper SRX1400 Hardware Manual page 45

Copyright © 2011, Juniper Networks, Inc.
The Routing Engine also provides the following integrated services:
Central Packet Forwarding Engine Processing (CPP) — This service manages all
common form-factor modules (CFM) cards.
System Control— This service provides system management functions such as
monitoring of fan trays, and power systems.
NOTE: The SRX1400 Services Gateway must have a Routing Engine installed
in slot RE. The SYSIOC port labeled RE ETHERNET connects directly to the
RE Routing Engine slot.
Figure 10 on page 25 shows the SRX1400 Services Gateway Routing Engine LEDs.
Figure 10: SRX1400 Services Gateway Routing Engine LEDs
Table 18 on page 25 describes the Routing Engine behavior indicated by the LEDs on its
front panel.
Table 18: Routing Engine LED Indicators
LED Label Color
Green
OK/FAIL
Red
Routing Engine Function
MASTER Blue
Chapter 2: SRX1400 Services Gateway Hardware Components
Status Indicated Behavior
On steadily The Routing Engine is operating normally.
Blinking The Routing Engine is rebooting or is
shutting down.
On steadily The Routing Engine has failed and is not
operating normally.
On steadily The Routing Engine is the master. This LED
should always be lit.
25