16-Port Sfp Gigabit Ethernet I/O Card - Juniper SRX1400 Hardware Manual

Related
Documentation

16-Port SFP Gigabit Ethernet I/O Card

Copyright © 2011, Juniper Networks, Inc.
Table 21: 16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O
Card LED Indicators
Label Color
Green
SERVICE
Amber
Dark (unlit)
Green
OK/FAIL
Green
Red
Dark (unlit)
16-Port SFP Gigabit Ethernet I/O Card on page 29
2-Port XFP 10-Gigabit Ethernet I/O Card on page 31
Installing an I/O Card with Copper Media Interfaces in an SRX1400 Services Gateway
on page 69
Installing an I/O Card with Fiber-Optic Media Interfaces in an SRX1400 Services
Gateway on page 70
Troubleshooting I/O Cards on the SRX1400 Services Gateway on page 107
The SRX3K-16GE-SFP adds 16 ports for Gigabit Ethernet traffic from either copper or
fiber interface media.
To use fiber or copper interface media, install small form-factor pluggable (SFP)
transceivers on the desired ports.
NOTE: We strongly recommend the use of Juniper Networks SFP and XFP
transceivers. We cannot guarantee correct operation if other transceivers are
used. The transceiver type can be different in each port, as long as a Juniper
Networks transceiver is used.
Chapter 2: SRX1400 Services Gateway Hardware Components
Status Indicated Behavior
On steadily The IOC is mapped to the Network and Service
Processing Card (NSPC) and is available to carry
Ethernet traffic.
On steadily The IOC is not mapped to the NSPC and is not
available to carry Ethernet traffic.
Off The IOC is administratively disabled but is mapped
to the NSPC.
On steadily The IOC is operating normally.
Blinking The IOC is preparing for an online insertion and
removal event:
IOC is being Inserted: power up, booting,
initialization.
IOC is being removed: shut down by chassis
management software.
On steadily The IOC has failed and is not operating normally.
Off The IOC is offline and can be safely removed.
29