Connecting The Srx1400 Services Gateway; Connecting The Srx1400 Services Gateway To A Management Device; Management - Juniper SRX1400 Hardware Manual

CHAPTER 8
Connecting the SRX1400 Services
Gateway

Connecting the SRX1400 Services Gateway to a Management Device

Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management
Copyright © 2011, Juniper Networks, Inc.
This chapter includes the following topics:
Connecting the SRX1400 Services Gateway to a Management Device on page 73
After you have installed the services gateway into the rack, attach one or more external
devices to the ports on the System I/O card (SYSIOC) that connect to the installed
Routing Engine for management and service operations.
This topic includes the following sections:
Connecting the SRX1400 Services Gateway to a Network for Out-of-Band
Management on page 73
Connecting the SRX1400 Services Gateway to a Management Console or an Auxiliary
Device on page 74
To connect the Routing Engine to a network for out-of-band management:
Plug one end of an Ethernet cable with RJ-45 connectors (see Figure 28 on page 74)
1.
into the
RE ETHERNET
port on the front of the SYSIOC.
73