16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide
Related
Documentation

16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card

28
NOTE: The IOCs are not provided with the SRX1400 Services Gateway. You
must order them separately. Contact your Juniper Networks customer service
representative for more information.
16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet I/O Card on page 28
16-Port SFP Gigabit Ethernet I/O Card on page 29
2-Port XFP 10-Gigabit Ethernet I/O Card on page 31
The SRX3K-16GE-TX adds 16 ports for standard Ethernet, Fast Ethernet, or Gigabit
Ethernet traffic from copper media. The ports utilize RJ-45 connectors. LEDs on the
faceplate of the IOC indicate port status and connectivity.
Figure 11 on page 28 shows the 16-Port Copper 10/100/1000 I/O Card.
Figure 11: 16-Port Copper 10/100/1000 IOC
NOTE:
If a CFM slot is not occupied by a card, you must install a blank panel to
shield the empty slot and to allow cooling air to circulate properly through
the device.
The ONLINE button on IOC does not perform any function and currently it
is not supported.
Table 21 on page 29 describes the 16-Port Copper 10/100/1000 IOC LEDs.
Copyright © 2011, Juniper Networks, Inc.