Installing The Mounting Hardware For The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide

Installing the Mounting Hardware for the SRX1400 Services Gateway

Related
Documentation
54
Removing Components from the Chassis for Manual Lifting of the SRX1400 Services
Gateway on page 59
Lifting the SRX1400 Services Gateway Chassis into a Rack on page 60
Reinstalling Components into the SRX1400 Services Gateway Chassis on page 62
The specific mounting hardware used depends on the type of rack you are using. Follow
the appropriate steps for your rack to install the mounting hardware.
To install the mounting hardware:
Locate the rack mount brackets in the accessory kit.
1.
Position a mounting bracket on each side of the chassis. You can position the brackets
2.
in front-mount or rear-mount position.
Use the screws provided to secure the rack mount brackets to the sides of the chassis
3.
as shown in Figure 19 on page 54.
Figure 19: Attaching Mounting Bracket to the SRX1400 Services Gateway
Required Tools for Installing the SRX1400 Services Gateway on page 53
Preparing the SRX1400 Services Gateway for Rack-Mount or Cabinet Installation on
page 53
Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
on page 55
Removing Components from the Chassis for Manual Lifting of the SRX1400 Services
Gateway on page 59
Lifting the SRX1400 Services Gateway Chassis into a Rack on page 60
Reinstalling Components into the SRX1400 Services Gateway Chassis on page 62
Copyright © 2011, Juniper Networks, Inc.