Juniper SRX1400 Hardware Manual page 107

Copyright © 2011, Juniper Networks, Inc.
Chapter 10: Performing Initial Software Configuration on the SRX1400 Services Gateway
Set the root authentication password by entering a cleartext password, an encrypted
5.
password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
Configure an administrator account on the device. When prompted, enter the password
6.
for the administrator account.
[edit]
root@# set system login user admin class super-user authentication plain-text-password
New password: password
Retype new password: password
Commit the configuration to activate it on the device.
7.
[edit]
root@# commit
Log in as the administrative user you configured in Step 6.
8.
Configure the name of the device. If the name includes spaces, enclose the name in
9.
quotation marks (" ").
configure
[edit]
admin@# set system host-name host-name
Configure the IP address and prefix length for the device's Ethernet interface.
10.
[edit]
admin@# set interfaces fxp0 unit 0 family inet address address/prefix-length
87