Installing The Srx1400 Services Gateway; Installation Overview For The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

CHAPTER 5

Installing the SRX1400 Services Gateway

Installation Overview for the SRX1400 Services Gateway

Copyright © 2011, Juniper Networks, Inc.
This chapter includes the following topics:
Installation Overview for the SRX1400 Services Gateway on page 51
SRX1400 Services Gateway Safety Requirements, Warnings, and Guidelines on page 52
Required Tools for Installing the SRX1400 Services Gateway on page 53
Preparing the SRX1400 Services Gateway for Rack-Mount or Cabinet
Installation on page 53
Installing the Mounting Hardware for the SRX1400 Services Gateway on page 54
Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical
Lift on page 55
Installing the SRX1400 Services Gateway in a Rack or Cabinet Manually (Without a
Mechanical Lift) on page 58
This section provides instructions for installing the SRX1400 Services Gateway in a rack
or cabinet. Because of the size and weight of the device—up to 42.5 lb (19.3 kg) (fully
loaded chassis) depending on the configuration—we recommend that you install it using
a mechanical lift. The SRX1400 Services Gateway is rack-mountable with support for
both front-mounting and rear-mounting.
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process as shown
in Table 32 on page 51.
Table 32: SRX1400 Services Gateway Installation Process
Procedures
Review the safety guidelines
For More Information, See:
"Site Preparation Checklist for the SRX1400 Services
Gateway" on page 41
51