Required Tools And Parts For Installing And Maintaining The Srx100; Required Tools And Parts For Installing And Maintaining The Srx100 Services Gateway - Juniper SRX100 Hardware Manual

Chapter 5
Required Tools and Parts for Installing
and Maintaining the SRX100 Services
Gateway
Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway
Table 15: Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
Task
Unpacking the SRX100 Services Gateway
Installing the SRX100 Services Gateway
Connecting the SRX100 Services
Gateway
Grounding the SRX100 Services Gateway
This chapter includes the following section:
Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway on page 29
Table 15 on page 29 lists the tools and parts required to install and maintain the
SRX100 Services Gateway.
Tools and Parts
Phillips (+) screwdriver, number 2
1/2 in. (13 mm) open-end or socket
wrench to remove bracket bolts
from the shipping pallet
Phillips (+) screwdriver, number 2
Tie wrap
Electrostatic discharge (ESD) grounding
wrist strap
Phillips (+) screwdrivers, numbers 1 and
2

Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway

Related Topic
"Unpacking the SRX100 Services
Gateway" on page 31
"Installing the SRX100 Services Gateway
in a Rack" on page 40
"Installing the SRX100 Services Gateway
on a Desk" on page 42
"Installing the SRX100 Services Gateway
on a Wall" on page 43
"Connecting the SRX100 Services
Gateway to the Power Supply" on page
45
"Grounding the SRX100 Services
Gateway" on page 47
29