Replacing Host Subsystem Components On The Srx1400 Services Gateway; Replacing A Routing Engine On The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide

Replacing Host Subsystem Components on the SRX1400 Services Gateway

Replacing a Routing Engine on the SRX1400 Services Gateway

120
NOTE: The SRX1400 Services Gateway power supply has one air filter located
in the front of the power supply. For information about replacing power supply
air filter, see "Replacing the Power Supply Air Filter on the SRX1400 Services
Gateway" on page 138.
To replace subsystem components of the services gateway, you must power down the
services gateway.
The following topics provide instructions on how to replace host subsystem components:
Replacing a Routing Engine on the SRX1400 Services Gateway on page 120
Replacing a Network and Services Processing Card on the SRX1400 Services
Gateway on page 122
Replacing an I/O Card on the SRX1400 Services Gateway on page 124
Replacing a System I/O Card on the SRX1400 Services Gateway on page 127
Replacing SFP and XFP Transceivers on I/O Cards on the SRX1400 Services
Gateway on page 128
Replacing SFP and SFP+ Transceivers on a System I/O Card on the SRX1400 Services
Gateway on page 130
The Routing Engine is located in the front slot labeled
Before you replace the Routing Engine, you must power off the services gateway.
To replace the Routing Engine:
Place an electrostatic bag or antistatic mat on a flat, stable surface.
1.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis. For more information about ESD, see "Preventing
Electrostatic Discharge Damage to the SRX1400 Services Gateway" on page 149.
Disconnect any cables connected to the
3.
Loosen the captive screws at each end of the Routing Engine faceplate.
4.
Pull open the ejector handles to unseat the Routing Engine as shown in Figure 37 on
5.
page 121.
on the services gateway.
RE0
or ports.
AUX USB
Copyright © 2011, Juniper Networks, Inc.