Juniper SRX1400 Hardware Manual page 54

SRX1400 Services Gateway Hardware Guide
34
Figure 14: SRX1400 Services Gateway AC Power Supply
AC Power Supply Electrical Specifications
Table 24 on page 34 lists the AC power supply electrical specifications.
Table 24: AC Power Supply Electrical Specifications
Parameter Specification
Maximum output 1000 W
power
AC input voltage 100-127 V / 200-240 V
AC input line frequency 50 / 60 Hz
AC input current rating 13.0 A (Max.) at 100 VAC
AC Power Supply LEDs
Each AC power supply faceplate displays a single LED to indicate the status of the power
supply (see Table 25 on page 34).
Table 25: AC Power Supply LEDs
Color Status
Green On steadily
Blinking
Condition Indicated
AC input voltage is present, and both main 12 V output and
standby 3.3 V output are enabled and healthy.
AC input voltage is present, standby 3.3 V output is on, but the
main 12 V output is disabled. This condition usually indicates
that the device has been powered off at the POWER button
on the SYSIOC front panel. This condition can also indicate
that either the SYSIOC or Routing Engine has been removed
from the services gateway.
Copyright © 2011, Juniper Networks, Inc.