Troubleshooting With Leds On The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

Troubleshooting with LEDs on the SRX1400 Services Gateway

Copyright © 2011, Juniper Networks, Inc.
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 2 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
Slot 3 information:
State
Temperature
Total CPU DRAM
Total RLDRAM
Total DDR DRAM
Start time:
Uptime:
Max Power Consumption
NOTE: For further descriptions of the output from the commands, see the
Junos System Basics and Services Command Reference.
NOTE: The
set chassis ioc-npc-connectivity
the SRX1400 Services Gateway.
You can also view the chassis properties in the J-Web interface by selecting
Monitor>Chassis. For more information on troubleshooting the individual hardware
components, see the following topics:
Troubleshooting the Cooling System on the SRX1400 Services Gateway on page 105
Troubleshooting System I/O Cards on the SRX1400 Services Gateway on page 107
Troubleshooting the Network and Services Processing Card on the SRX1400 Services
Gateway on page 108
Troubleshooting the Power System on the SRX1400 Services Gateway on page 109
Troubleshooting I/O Cards on the SRX1400 Services Gateway on page 107
The SRX1400 Services Gateway LEDs, listed in Table 33 on page 104 display the status
of various components.
Chapter 12: Troubleshooting the SRX1400 Services Gateway
Online
34 degrees C / 93 degrees F
1024 MB
0 MB
0 MB
2010-07-08 13:56:24 UTC
2 hours, 22 minutes, 55 seconds
0 Watts
Online
32 degrees C / 89 degrees F
1024 MB
0 MB
0 MB
2010-07-08 13:56:19 UTC
2 hours, 23 minutes
0 Watts
Online
54 degrees C / 129 degrees F
1024 MB
0 MB
0 MB
2010-07-08 13:56:19 UTC
2 hours, 23 minutes
0 Watts
command is not supported on
103