Gateway - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide
Related
Documentation
Console Port Cable and Wire Specifications for the SRX1400 Services Gateway
Related
Documentation
198
P = 5.5 dB
M
In both examples, the calculated power margin is greater than zero, indicating that the
link has sufficient power for transmission and does not exceed the maximum receiver
input power.
SRX1400 Services Gateway Electrical Wiring Guidelines on page 193
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the SRX1400 Services
Gateway on page 194
Attenuation and Dispersion in Fiber-Optic Cable for the SRX1400 Services Gateway
on page 195
Calculating the Power Budget for Fiber-Optic Cable for the SRX1400 Services Gateway
on page 196
Table 51 on page 198 lists the specifications for the cable that connects a
on the SYSIOC to a management console.
Table 51: Cable and Wire Specifications for Routing Engine Management
and Alarm Interfaces
Cable
Port Specification
SYSIOC RS-232
console or (EIA-232)
Routing Engine serial cable
auxiliary
interface
SRX1400 Services Gateway Electrical Wiring Guidelines on page 193
Connecting the SRX1400 Services Gateway to a Management Console or an Auxiliary
Device on page 74
Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management
on page 73
Cable/Wire Maximum
Supplied Length
One 6-ft (1.83-m) 6 ft (1.83 m)
length with
RJ-45/DB-9
connectors
Copyright © 2011, Juniper Networks, Inc.
port
CONSOLE
Receptacle
RJ-45/DB-9 male