Srx1400 Services Gateway Spacing Of Mounting Bracket Holes; Structure; Clearance Requirements For Airflow And Hardware Maintenance Of The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
Figure 16: Typical Open-Frame Rack

SRX1400 Services Gateway Spacing of Mounting Bracket Holes

The device can be mounted in any rack that provides holes or hole patterns spaced at
1 U (1.75 in. or 4.4 cm) increments. The mounting brackets used to attach the chassis to
a rack are designed to fasten to holes spaced at those distances.
Connecting the SRX1400 Services Gateway to the Building Structure
Always secure the rack to the structure of the building. If your geographical area is subject
to earthquakes, bolt the rack to the floor. For maximum stability, also secure the rack to
ceiling brackets. For more information, see "Rack-Mounting Requirements and Warnings"
on page 153.
Installation Overview for the SRX1400 Services Gateway on page 51
Site Preparation Checklist for the SRX1400 Services Gateway on page 41
SRX1400 Services Gateway Cabinet Requirements on page 43
Clearance Requirements for Airflow and Hardware Maintenance of the SRX1400
Services Gateway on page 46
Chapter 3: Preparing the Site for SRX1400 Services Gateway Installation
45