Gateway; Table 30: Required Tools And Parts For Installing And Maintaining The Srx110 Services Gateway - Juniper SRX110 Manual

SRX110 Services Gateway Hardware
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
78
Table 29: Installation Procedure for the SRX110 Services
Gateway (continued)
Step Task
7 Connect the grounding cables.
8 Power on the services gateway.
Unpacking the SRX110 Services Gateway on page 81
General Site Guidelines for Installing the SRX110 Services Gateway on page 38
Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
Table 30 on page 78 lists the tools and equipments required for installing and maintaining
the SRX110 Services Gateway.
Table 30: Required Tools and Parts for Installing and Maintaining the
SRX110 Services Gateway
Task Tools and Parts
Installing the SRX110
Services Gateway
Connecting the Electrostatic discharge (ESD)
SRX110 Services grounding wrist strap

Gateway

Grounding the SRX110 Phillips (+) screwdriver,
Services Gateway number 1
Packing the SRX110
Services Gateway
Additional Information
"Grounding the SRX110 Services Gateway" on
page 103
"Powering On the SRX110 Services Gateway" on
page 105
"Powering Off the SRX110 Services Gateway" on
page 105
Phillips (+) screwdriver,
number 1
Phillips (+) screwdriver,
number 3
Tie wrap
Electrostatic bag or
antistatic mat, for each
component
Electrostatic discharge
(ESD) grounding wrist strap
Additional Information
"Installing the SRX110 Services
Gateway in a Rack" on page 89
"Installing the SRX110 Services
Gateway on a Desk" on page 93
"Installing the SRX110 Services
Gateway on a Wall" on page 95
"Connecting the SRX110 Services
Gateway to the Power Supply" on
page 101
"Grounding the SRX110 Services
Gateway" on page 103
"Packing the SRX110 Services Gateway
and Components for Shipment" on
page 152
Copyright © 2012, Juniper Networks, Inc.