Juniper SRX1400 Hardware Manual page 69

Verifying Parts Received with the SRX1400 Services Gateway
Copyright © 2011, Juniper Networks, Inc.
Verifying Parts Received with the SRX1400 Services Gateway on page 49
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order. Note that feature and service cards are shipped in separate boxes
from the chassis.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the chassis with installed components,
listed in Table 30 on page 49, and an accessory box, which contains the parts listed in
Table 31 on page 50. The parts shipped with your device can vary depending on the
configuration you ordered.
Table 30: Parts List for a Fully Configured SRX1400 Services Gateway
Component
Chassis, including backplane, and rack-mounting brackets
NSPC
Routing Engine
System I/O card
Power supplies
Fan tray
Air filter
SRX1400 Services Gateway Getting Started Guide
Blank panels for slots without components installed
AC Power Cord
NOTE: The NSPC and IOC are not a part of the base chassis configuration.
You must order them separately. Contact your Juniper Networks customer
service representative for more information.
Chapter 4: Unpacking the SRX1400 Services Gateway
Quantity
1
1
1
1
At least 1 and up to 2
1
1
1
1 single-wide blank panel for
the slot not occupied by an
IOC
1 dual-wide blank panel for
NSPC slot not occupied by
an NSPC.
1
49