Srx1400 Services Gateway System I/O Cards - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide
Related
Documentation

SRX1400 Services Gateway System I/O Cards

16
Figure 4 on page 16 shows the SRX1400 Services Gateway Backplane.
Figure 4: SRX1400 Services Gateway Backplane
The backplane provides the following major functionalities:
Data path—Data packets are transferred across the backplane between the I/O card
(IOC) and Network and Services Processing Card (NSPC) through the System I/O card
(SYSIOC).
Power distribution—The device power supplies are connected to the backplane, which
distributes power to all of the device components.
Signal path—The backplane provides the signal path to the IOC, NSPC, Routing Engine,
SYSIOC, and other device components for monitoring and control of the system.
SRX1400 Services Gateway Hardware Components on page 13
SRX1400 Services Gateway Back Panel on page 15
SRX1400 Services Gateway Front Panel on page 14
Overview of the SRX1400 Services Gateway Common Form-Factor Modules on page 11
The System I/O card (SYSIOC) supported on the SRX1400 Services Gateway provides
fixed I/O ports for the base system and it is an important element of the data plane.
NOTE: The SYSIOC is included as a part of base chassis system.
The SRX1400 Services Gateway supports the two types of SYSIOCs, which are listed in
Table 12 on page 16.
Table 12: SRX1400 Services Gateway System I/O Card Models
System I/O Card Model Numbers
SRX1K-SYSIO-GE
Cards Type
1-Gigabit Ethernet SYSIOC
Copyright © 2011, Juniper Networks, Inc.