Juniper SRX100 Hardware Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Gateway
  5. SRX100
  6. Hardware manual

Juniper SRX100 Hardware Manual

Services gateway
Hide thumbs Also See for SRX100:
Table of Contents

Advertisement

Quick Links

Enlarged version
SRX100 Services Gateway
Hardware Guide
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Published: 2009-08-19

Advertisement

Table of Contents
loading

Related Manuals for Juniper SRX100

Summary of Contents for Juniper SRX100

  • Page 1 SRX100 Services Gateway Hardware Guide Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Published: 2009-08-19...
  • Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
  • Page 3 (g) distribute any key for the Software provided by Juniper to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller;...
  • Page 4 (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s).
  • Page 5 Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein.

  • Page 7: Table Of Contents

    SRX100 Services Gateway Hardware Components and Specifications SRX100 Services Gateway Specifications ............5 SRX100 Services Gateway Front Panel and Back Panel Views ......6 SRX100 Services Gateway Front Panel .............6 SRX100 Services Gateway Back Panel ............7 SRX100 Services Gateway Built-In Interfaces ..........8 SRX100 Services Gateway LEDs ..............10...
  • Page 8 Installation Overview for the SRX100 Services Gateway ........26 Chapter 5 Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway ....................29 Chapter 6 Unpacking the SRX100 Services Gateway Unpacking the SRX100 Services Gateway .............31...
  • Page 9 Connecting the Modem at the SRX100 Services Gateway End ....64 Connecting the Modem to the Console Port on the SRX100 Services Gateway ...................65 Connecting to the CLI at the User End for the SRX100 Services Gateway ...................66 Configuring Basic Connectivity Settings on the SRX100 Services Gateway ....................67...
  • Page 10 Monitoring the SRX100 Services Gateway Power System .......84 Resetting the Configuration File When the SRX100 Services Gateway Is Inaccessible ....................85 Using the Reset Config Button on the SRX100 Services Gateway ....85 Changing the Reset Config Button Behavior on the SRX100 Services Gateway ...................86 Juniper Networks Technical Assistance Center ..........86...
  • Page 11 Connector Pinouts Interface Cable and Wire Specifications for the SRX100 Services Gateway ....................119 RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port ..120 RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port ..120 Appendix D Contacting Customer Support and Returning the SRX100 Services Gateway Hardware Return Procedure for the SRX100 Services Gateway ........123...
  • Page 12 SRX100 Services Gateway Hardware Guide Table of Contents...
  • Page 13 Audience This guide is designed for network administrators who are installing and maintaining a Juniper Networks SRX100 Services Gateway or preparing a site for device installation. To use this guide, you need a broad understanding of networks in general and the Internet in particular, networking principles, and network configuration. Any detailed discussion of these concepts is beyond the scope of this guide.

  • Page 14: Documentation Conventions

    SRX100 Services Gateway Hardware Guide Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death.

  • Page 15: Srx Series Documentation And Release Notes

    To obtain the most current version of all Juniper Networks technical documentation, see the products documentation page on the Juniper Networks website at http://www.juniper.net/techpubs. To order printed copies of this guide and other Juniper Networks technical documents, or to order a documentation CD, which contains this guide, contact your sales representative.

  • Page 16: Documentation Feedback

    7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
  • Page 17 About This Guide Join and participate in the Juniper Networks Community Forum: http://www.juniper.net/company/communities/ Open a case online in the CSC Case Manager: http://www.juniper.net/cm/ To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) tool located at https://tools.juniper.net/SerialNumberEntitlementSearch/...
  • Page 18 SRX100 Services Gateway Hardware Guide xviii Requesting Technical Support...

  • Page 19: Part

    Part 1 SRX100 Services Gateway Overview Introduction to the SRX100 Services Gateway on page 3 SRX100 Services Gateway Hardware Components and Specifications on page 5 SRX100 Services Gateway Overview...
  • Page 20 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Overview...

  • Page 21: Introduction To The Srx100 Services Gateway

    Accessing the SRX100 Services Gateway on page 3 About the SRX100 Services Gateway The Juniper Networks SRX100 Services Gateway offers features that provide complete functionality and flexibility for delivering secure Internet and intranet access. The services gateway offers stable, reliable, and efficient IP routing in addition to switching support and LAN connectivity.
  • Page 22 NAND flash 1 GB 1 GB For more details on JUNOS Software features and licenses for the SRX100 Services Gateway, see the JUNOS Software Administration Guide. For more information on upgrading an SRX100 Services Gateway Low Memory to High Memory, see “Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory Version”...

  • Page 23: Srx100 Services Gateway Hardware Components And Specifications

    SRX100 Services Gateway Power Supply on page 13 SRX100 Services Gateway Specifications The SRX100 Services Gateway chassis is a rigid sheet metal structure that houses all the other hardware components (see Figure 1 on page 6). Table 4 on page 5 provides information on the physical specifications of the device.

  • Page 24: Srx100 Services Gateway Front Panel And Back Panel Views

    SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 109 SRX100 Services Gateway Front Panel and Back Panel Views This topic contains views of the front and back panels of the SRX100 Services Gateway. This topic includes the following sections:...

  • Page 25: Srx100 Services Gateway Built-In Interfaces

    SRX100 Services Gateway LEDs on page 10 SRX100 Services Gateway Boot Devices on page 13 SRX100 Services Gateway Back Panel Figure 3 on page 8 illustrates the back panel of the SRX100 Services Gateway. SRX100 Services Gateway Front Panel and Back Panel Views...

  • Page 26: Srx100 Services Gateway Power Supply

    SRX100 Services Gateway Hardware Guide Figure 3: SRX100 Services Gateway Back Panel Table 6 on page 8 lists the components available on the back panel of the SRX100 Services Gateway. Table 6: SRX100 Services Gateway Back Panel Number Component Lock...
  • Page 27 Chapter 2: SRX100 Services Gateway Hardware Components and Specifications Table 7: SRX100 Services Gateway Built-In Hardware Interfaces Interface Type Specifications Description Fast Ethernet The Fast Ethernet ports: The Fast Ethernet ports can be used: Consist of eight fixed ports To provide LAN connectivity to...
  • Page 28 SRX100 Services Gateway Ethernet Port LEDs on page 12 SRX100 Services Gateway Front Panel LEDs Figure 4 on page 10 illustrates the front panel LEDs of the SRX100 Services Gateway. NOTE: The numbers in Figure 4 on page 10 correspond to the numbers in Table 8...
  • Page 29 Chapter 2: SRX100 Services Gateway Hardware Components and Specifications Table 8: SRX100 Services Gateway Front Panel LEDs Number Component Description Usage Alarm LED The Alarm LED has the The Alarm LED can be used following indicator colors: to gather information on...
  • Page 30 SRX100 Services Gateway Ethernet Port LEDs On the SRX100 Services Gateway, each Fast Ethernet port has one functional LED on the left side that indicates Link and Activity. In Figure 5 on page 12, this LED is marked as 1.
  • Page 31 SRX100 Services Gateway Power Supply on page 13 SRX100 Services Gateway Power Supply The power supply for the SRX100 Services Gateway is external. You must use the power supply adapter provided by Juniper Networks to provide power to the services gateway.
  • Page 32 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Power Supply...
  • Page 33 Part 2 Setting Up the SRX100 Services Gateway Preparing the Site for SRX100 Services Gateway Installation on page 17 Installation Overview for the SRX100 Services Gateway on page 25 Required Tools and Parts for Installing and Maintaining the SRX100 Services...
  • Page 34 SRX100 Services Gateway Hardware Guide Setting Up the SRX100 Services Gateway...

  • Page 35: Preparing The Site For Srx100 Services Gateway Installation

    Gateway Installation This chapter provides a checklist to help you prepare your site for installation of the SRX100 Services Gateway. Read this section to make sure that your site has the proper operating environment and equipment. This chapter includes the following sections:...
  • Page 36 Verify that the area selected “Preparing the meets the minimum SRX100 Services requirements. Gateway for Wall-Mount Verify that you have the Installation” on page required hardware to proceed with the installation. Desktop Installation Site Preparation Checklist for the SRX100 Services Gateway...
  • Page 37 39 Installation Overview for the SRX100 Services Gateway on page 26 General Site Guidelines for Installing the SRX100 Services Gateway on page 19 SRX100 Services Gateway Cabinet Requirements on page 20 SRX100 Services Gateway Rack Requirements on page 21...

  • Page 38: Srx100 Services Gateway Cabinet Requirements

    Services Gateway on page 22 SRX100 Services Gateway Cabinet Requirements The SRX100 Services Gateway can be installed in a standard 31.5 in. (800 mm) or larger enclosed cabinet. Table 11 on page 20 provides the details on cabinet size, clearance, and airflow requirements.
  • Page 39 Chapter 3: Preparing the Site for SRX100 Services Gateway Installation General Site Guidelines for Installing the SRX100 Services Gateway on page 19 Related Topics SRX100 Services Gateway Rack Requirements on page 21 Site Preparation Checklist for the SRX100 Services Gateway on page 17...

  • Page 40: Clearance Requirements For Airflow And Hardware Maintenance Of The Srx100 Services Gateway

    Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services Gateway When planning the installation site for the SRX100 Services Gateway, you need to allow sufficient clearance around the device. When planning the installation site for the services gateway, consider the following: For the operating temperature of the services gateway to be optimal, the airflow around the chassis must be unrestricted.

  • Page 41: Srx100 Services Gateway Electrical And Power Requirements

    Chapter 3: Preparing the Site for SRX100 Services Gateway Installation NOTE: The air vents are provided on the sides of the chassis for the SRX100 Services Gateway. SRX100 Services Gateway Description on page 3 Related Topics General Site Guidelines for Installing the SRX100 Services Gateway on page 19...
  • Page 42 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Electrical and Power Requirements...

  • Page 43: Installation Overview For The Srx100 Services Gateway

    Chapter 4 Installation Overview for the SRX100 Services Gateway This chapter includes the following section: Installation Overview for the SRX100 Services Gateway on page 26...

  • Page 44: Installation Overview For The Srx100 Services Gateway

    Unpacking the SRX100 Services Gateway on page 31 Related Topics General Site Guidelines for Installing the SRX100 Services Gateway on page 19 Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 35 Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 36...
  • Page 45 Chapter 4: Installation Overview for the SRX100 Services Gateway Installing the SRX100 Services Gateway in a Rack on page 40 Installing the SRX100 Services Gateway on a Desk on page 42 Installing the SRX100 Services Gateway on a Wall on page 43...
  • Page 46 SRX100 Services Gateway Hardware Guide Installation Overview for the SRX100 Services Gateway...

  • Page 47: Required Tools And Parts For Installing And Maintaining The Srx100

    Gateway Table 15 on page 29 lists the tools and parts required to install and maintain the SRX100 Services Gateway. Table 15: Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway Task Tools and Parts Related Topic...
  • Page 48 SRX100 Services Gateway Hardware Guide Table 15: Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway (continued) Task Tools and Parts Related Topic Packing the SRX100 Services Gateway Electrostatic bag or antistatic mat, “Packing the SRX100 Services Gateway for each component and Components for Shipment”...

  • Page 49: Unpacking The Srx100 Services Gateway

    Verifying Parts Received with the SRX100 Services Gateway on page 32 Unpacking the SRX100 Services Gateway The SRX100 Services Gateway is shipped in a cardboard carton. The carton also contains an accessory box and the SRX100 Services Gateway Getting Started Guide.

  • Page 50: Verifying Parts Received With The Srx100 Services Gateway

    Security Products Safety Guide Juniper Compliance Form Letter Product Registration NOTE: The mounting kits available for rack, desk, and wall installation of the SRX100 Services Gateway must be ordered separately. Contact your Juniper Networks customer service representative for more information.
  • Page 51 Chapter 6: Unpacking the SRX100 Services Gateway Required Tools and Parts for Installing and Maintaining the SRX100 Services Related Topics Gateway on page 29 Unpacking the SRX100 Services Gateway on page 31 Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 35...
  • Page 52 SRX100 Services Gateway Hardware Guide Verifying Parts Received with the SRX100 Services Gateway...

  • Page 53: Chapter 7 Preparing The Srx100 Services Gateway For Installation

    Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37 Preparing the SRX100 Services Gateway for Rack-Mount Installation You can mount an SRX100 Services Gateway in four-post (telco) racks, enclosed cabinets, and open-frame racks. NOTE: Center-mount racks are not supported.

  • Page 54: Preparing The Srx100 Services Gateway For Desk-Mount Installation

    Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37 Preparing the SRX100 Services Gateway for Desk-Mount Installation You can mount an SRX100 Services Gateway on a desk or other level surface horizontally or vertically. The four rubber feet attached to the chassis provide stability.
  • Page 55 Chapter 7: Preparing the SRX100 Services Gateway for Installation Preparing the SRX100 Services Gateway for Wall-Mount Installation You can mount an SRX100 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability. Before mounting an SRX100 Services Gateway on a wall: Verify that the site meets the requirements described in “Site Preparation...
  • Page 56 SRX100 Services Gateway Hardware Guide Preparing the SRX100 Services Gateway for Wall-Mount Installation...

  • Page 57: Installing The Srx100 Services Gateway

    Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 36 Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 37 General Site Guidelines for Installing the SRX100 Services Gateway on page 19 Installing the SRX100 Services Gateway This topic includes the following sections:...

  • Page 58: Installing The Srx100 Services Gateway In A Rack

    SRX100 Services Gateway Hardware Guide Installing the SRX100 Services Gateway in a Rack You can front-mount two SRX100 Services Gateways in a rack. Many types of racks are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks. For more information about the type of rack or cabinet the SRX100 Services Gateway can be installed into, see “SRX100 Services Gateway Rack Requirements”...
  • Page 59 NOTE: The rack-mounting kit is not shipped with the device and must be ordered separately. Required Tools and Parts for Installing and Maintaining the SRX100 Services Related Topics Gateway on page 29...

  • Page 60: Installing The Srx100 Services Gateway On A Desk

    SRX100 Services Gateway Hardware Guide Installing the SRX100 Services Gateway on a Desk You can install the SRX100 Services Gateway on a desk, table, or other level surface. The device is shipped with the rubber feet attached. The rubber feet are necessary to stabilize the device on the desk.

  • Page 61: Installing The Srx100 Services Gateway On A Wall

    Installing the SRX100 Services Gateway on a Wall on page 43 Installing the SRX100 Services Gateway on a Wall You can install the SRX100 Services Gateway on a wall. The device is shipped with the rubber feet attached. The rubber feet help stabilize the device on the wall and enhance airflow.
  • Page 62 Installing the SRX100 Services Gateway on a Desk on page 42 Installing the SRX100 Services Gateway in a Rack on page 40 Connecting the SRX100 Services Gateway to the Power Supply on page 45 Installing the SRX100 Services Gateway on a Wall...

  • Page 63: Connecting The Srx100 Services Gateway To The Power Supply

    Connecting, Grounding, and Powering On the SRX100 Services Gateway This chapter includes the following sections: Connecting the SRX100 Services Gateway to the Power Supply on page 45 Connecting and Organizing Interface Cables to the SRX100 Services Gateway on page 46...
  • Page 64 Place excess cable out of the way in neatly coiled loops. Use fasteners to maintain the shape of cable loops. Connecting the SRX100 Services Gateway to the Power Supply on page 45 Related Topics Grounding the SRX100 Services Gateway on page 47...

  • Page 65: Gateway

    A cable with an incorrectly attached lug can damage the device (for example, by causing a short circuit). Table 18 on page 47 lists the grounding components of the SRX100 Services Gateway. Table 18: SRX100 Services Gateway Grounding Components...

  • Page 66: Powering On And Powering Off The Srx100 Services Gateway

    SRX100 Services Gateway General Safety Guidelines and Warnings on page 93 Powering On and Powering Off the SRX100 Services Gateway on page 48 Using the Reset Config Button on the SRX100 Services Gateway on page 85 Changing the Reset Config Button Behavior on the SRX100 Services Gateway on...
  • Page 67 For more information on power button, see “SRX100 Services Gateway LEDs” on page 10. WARNING: Do not press the Power button while the device is shutting down.
  • Page 68 Connecting the SRX100 Services Gateway to the Power Supply on page 45 Grounding the SRX100 Services Gateway on page 47 Using the Reset Config Button on the SRX100 Services Gateway on page 85 Changing the Reset Config Button Behavior on the SRX100 Services Gateway on...

  • Page 69: Srx100 Services Gateway Memory Upgrade

    SRX100 Services Gateway High Memory - 1 GB SRX100 Services Gateway Low Memory - 512 MB All SRX100 Services Gateways have a built-in DDR memory of 1 GB. The SRX100 Services Gateway Low Memory devices can utilize a maximum of 512 MB of DDR memory.
  • Page 70 To obtain a memory license, contact your Juniper Networks customer services representative. SRX100 Services Gateway Features and Functions on page 4 Related Topics SRX100 Services Gateway Specifications on page 5 Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory Version...

  • Page 71: Srx100 Services Gateway Autoinstallation

    For more information about configuring autoinstallation, see the JUNOS Software Administration Guide . Connecting the SRX100 Services Gateway to the Power Supply on page 45 Related Topics Grounding the SRX100 Services Gateway on page 47 Powering On and Powering Off the SRX100 Services Gateway on page 48...
  • Page 72 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Autoinstallation Overview...

  • Page 73: Establishing Basic Connectivity For The Srx100 Services Gateway

    Configuring Basic Connectivity Settings on the SRX100 Services Gateway on page 67 SRX100 Services Gateway Basic Connectivity This topic includes the following sections on connecting the SRX100 Services Gateway to the network and establishing basic connectivity: SRX100 Services Gateway Basic Connectivity Overview on page 55...
  • Page 74 Built-In Ethernet Ports for the SRX100 Services Gateway on page 58 Management Access for the SRX100 Services Gateway on page 59 Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Connecting an SRX100 Services Gateway to the CLI Locally on page 62...
  • Page 75 Chapter 12: Establishing Basic Connectivity for the SRX100 Services Gateway Table 20: Services Gateway Basic Connectivity Settings Details Elements Descriptions Settings Device The hostname defines the network or subnetwork to The hostname refers to the specific machine, while identification which your services gateway belongs.

  • Page 76: Srx100 Services Gateway Basic Connectivity Overview

    , on the front panel of the SRX100 Services Gateway are the ports through which you perform initial device setup. The examples in this section use the port as the management fe-0/0/0 interface, but you can use any built-in Ethernet port for management. After the initial configuration is complete, you can attach the built-in Ethernet port that you are using for management purposes to the management network.
  • Page 77 SRX100 Services Gateway Basic Connectivity Settings on page 56 Management Access for the SRX100 Services Gateway on page 59 Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Connecting an SRX100 Services Gateway to the CLI Locally on page 62...

  • Page 78: Connecting To An Srx100 Services Gateway

    Gateway on page 66 Connecting an SRX100 Services Gateway to the J-Web Interface If you plan to use the J-Web interface to configure the SRX100 Services Gateway, you must connect through one of the built-in Ethernet management ports. Connecting to an SRX100 Services Gateway...

  • Page 79: Connecting An Srx100 Services Gateway To The J-Web Interface

    Figure 13 on page 61. Figure 13: Connecting to the Ethernet Port on an SRX100 Services Gateway From the management device you use to access the J-Web interface (such as a PC or a laptop), verify that the address of the port you connect to is set to one...

  • Page 80: Connecting An Srx100 Services Gateway To The Cli Locally

    Configuration on page 67 Connecting an SRX100 Services Gateway to the CLI Locally If you plan to use the CLI to configure the SRX100 Services Gateway, you must connect through the console port, as shown in Figure 14 on page 62.

  • Page 81: Gateway

    SRX100 Services Gateway Basic Connectivity Overview on page 55 Related Topics Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Connecting an SRX100 Services Gateway to the CLI Remotely on page 64 Connecting an SRX100 Services Gateway to the CLI Locally...
  • Page 82 Connecting the Modem at the SRX100 Services Gateway End on page 64 Connecting an SRX100 Services Gateway to the CLI Remotely You can connect an SRX100 Services Gateway to the CLI from a remote location through two dial-up modems: A modem that is connected to the console port on the services gateway...

  • Page 83: Connecting The Modem To The Console Port On The Srx100 Services Gateway

    Related Topics page 65 Connecting to the CLI at the User End for the SRX100 Services Gateway on page Connecting an SRX100 Services Gateway to the CLI Locally on page 62 Connecting an SRX100 Services Gateway to the CLI Remotely on page 64...

  • Page 84: Connecting To The Cli At The User End For The Srx100 Services Gateway

    Connecting the Modem at the SRX100 Services Gateway End on page 64 Related Topics Connecting to the CLI at the User End for the SRX100 Services Gateway on page Connecting an SRX100 Services Gateway to the CLI Locally on page 62...

  • Page 85: Gateway

    Connecting the Modem at the SRX100 Services Gateway End on page 64 Related Topics Connecting the Modem to the Console Port on the SRX100 Services Gateway on page 65 Connecting an SRX100 Services Gateway to the CLI Locally on page 62...
  • Page 86 Click OK to apply the configuration and return to the initial configuration set up page. Click Cancel to cancel your entries and return to the initial configuration set up page. Configuring Basic Settings for the SRX100 Services Gateway with J-Web Quick Configuration...
  • Page 87 NTP server when you click Apply or OK. To set the time manually, click Set Time Manually. A window allows you to select the current date and time from lists. Network Configuring Basic Settings for the SRX100 Services Gateway with J-Web Quick Configuration...

  • Page 88: Configuring Basic Settings For The Srx100 Services Gateway With A Configuration Editor

    SSH. SRX100 Services Gateway Basic Connectivity Overview on page 55 Related Topics Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Displaying Basic Connectivity Configurations for the SRX100 Services Gateway on page 73 Configuring Basic Settings for the SRX100 Services Gateway with a Configuration...
  • Page 89 Name the domain in which In the Domain name box, type the domain name of the Set the domain name. For the device is located. device—for example, example: lab.device.net set domain-name lab.device.net Configuring Basic Settings for the SRX100 Services Gateway with a Configuration Editor...
  • Page 90 SRX100 Services Gateway Basic Connectivity Overview on page 55 Related Topics Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Connecting an SRX100 Services Gateway to the CLI Locally on page 62 Configuring Basic Settings for the SRX100 Services Gateway with a Configuration Editor...

  • Page 91: Displaying Basic Connectivity Configurations For The Srx100 Services Gateway

    Chapter 12: Establishing Basic Connectivity for the SRX100 Services Gateway Connecting an SRX100 Services Gateway to the CLI Remotely on page 64 Displaying Basic Connectivity Configurations for the SRX100 Services Gateway on page 73 Displaying Basic Connectivity Configurations for the SRX100 Services Gateway To verify that the services gateway has the settings you configured, you should display the basic connectivity configurations.

  • Page 92: Srx100 Services Gateway Secure Web Access Overview

    SRX100 Services Gateway Basic Connectivity Overview on page 55 Related Topics Connecting an SRX100 Services Gateway to the J-Web Interface on page 60 Connecting an SRX100 Services Gateway to the CLI Locally on page 62 Connecting an SRX100 Services Gateway to the CLI Remotely on page 64...
  • Page 93 Part 3 SRX100 Services Gateway Hardware Maintenance, Replacement, and Monitoring Procedures Maintaining the SRX100 Services Gateway Hardware Components on page 77 Monitoring the SRX100 Services Gateway on page 79 SRX100 Services Gateway Hardware Maintenance, Replacement, and Monitoring Procedures...
  • Page 94 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Hardware Maintenance, Replacement, and Monitoring Procedures...

  • Page 95: Components

    Chapter 13 Maintaining the SRX100 Services Gateway Hardware Components This chapter describes how to maintain the hardware components of the SRX100 Services Gateway. This chapter includes the following section: Maintaining the SRX100 Services Gateway Hardware Components on page 77 Maintaining the SRX100 Services Gateway Hardware Components Table 27 on page 77 describes the common tasks for maintaining the hardware components of the services gateway.
  • Page 96 SRX100 Services Gateway Hardware Guide Maintaining the SRX100 Services Gateway Hardware Components...

  • Page 97: Monitoring The Srx100 Services Gateway

    Monitoring the Hardware Components on the SRX100 Services Gateway This topic includes the following sections: Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 79 Monitoring the SRX100 Services Gateway Components Using LEDs on page 81 Monitoring the SRX100 Services Gateway Using Chassis Alarm...
  • Page 98 CPU Utilization (%) Memory Utilization (%) Slot State Total Interrupt DRAM (MB) Heap Buffer 0 Online -------------------- CPU less FPC -------------------- show chassis alarms show chassis alarms user@host > No alarms currently active Monitoring the SRX100 Services Gateway Chassis Using the CLI...

  • Page 99: Using The Reset Config Button On The Srx100 Services Gateway

    Monitoring the SRX100 Services Gateway Power System on page 84 Maintaining the SRX100 Services Gateway Hardware Components on page 77 Using the Reset Config Button on the SRX100 Services Gateway on page 85 Juniper Networks Technical Assistance Center on page 87 Monitoring the SRX100 Services Gateway Components Using LEDs Table 28 on page 81 describes the status of the LEDs on start up of the device.
  • Page 100 AC input voltage between 100 and 240 VAC. See “Monitoring the SRX100 Services Gateway Power System” on page 84 Monitoring the SRX100 Services Gateway Components Using LEDs...

  • Page 101: Monitoring The Srx100 Services Gateway Using Chassis Alarm Conditions

    For more information on the command, see the JUNOS Software show chassis alarms Administration Guide. Table 30 on page 83 describes alarms that can occur for an SRX100 Services Gateway chassis component. Table 30: SRX100 Services Gateway Chassis Alarm Conditions and Corrective Actions Component...
  • Page 102 SRX100 Services Gateway Hardware Guide Using the Reset Config Button on the SRX100 Services Gateway on page 85 Changing the Reset Config Button Behavior on the SRX100 Services Gateway on page 86 Juniper Networks Technical Assistance Center on page 87...

  • Page 103: Changing The Reset Config Button Behavior On The Srx100 Services

    Resetting the Configuration File When the SRX100 Services Gateway Is Inaccessible This topic includes the following sections: Using the Reset Config Button on the SRX100 Services Gateway on page 85 Changing the Reset Config Button Behavior on the SRX100 Services...
  • Page 104 To return the function of the Reset Config button to its default behavior, remove the config-button statement from the device configuration. Using the Reset Config Button on the SRX100 Services Gateway on page 85 Related Topics Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 79...
  • Page 105 Chapter 14: Monitoring the SRX100 Services Gateway Juniper Networks Technical Assistance Center If you need assistance while troubleshooting a services gateway, open a support case using the Case Manager link at , or call 1-888-314-JTAC http://www.juniper.net/support/ (within the United States) or 1-408-745-9500 (from outside the United States).
  • Page 106 SRX100 Services Gateway Hardware Guide Juniper Networks Technical Assistance Center...

  • Page 107: Appendixes

    Safety and Regulatory Compliance Information on page 91 SRX100 Services Gateway Power Guidelines, Requirements, and Specifications on page 115 SRX100 Services Gateway Interface Cable Specifications and Connector Pinouts on page 119 Contacting Customer Support and Returning the SRX100 Services Gateway Hardware on page 123 Appendixes...
  • Page 108 SRX100 Services Gateway Hardware Guide Appendixes...

  • Page 109: Safety And Regulatory Compliance Information

    Safety and Regulatory Compliance Information This appendix includes the following sections: SRX100 Services Gateway Definition of Safety Warning Levels on page 91 SRX100 Services Gateway General Safety Guidelines and Warnings on page 93 SRX100 Services Gateway Fire Safety Requirements on page 96...
  • Page 110 Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. SRX100 Services Gateway Definition of Safety Warning Levels...
  • Page 111 Appendix A: Safety and Regulatory Compliance Information SRX100 Services Gateway General Safety Guidelines and Warnings on page 93 Related Topics SRX100 Services Gateway Fire Safety Requirements on page 96 SRX100 Services Gateway Installation Safety Guidelines and Warnings on page SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on...
  • Page 112 Varoitus Tämä laite on tarkoitettu asennettavaksi paikkaan, johon pääsy on rajoitettua. Paikka, johon pääsy on rajoitettua, tarkoittaa paikkaa, johon vain huoltohenkilöstö pääsee jonkin erikoistyökalun, lukkoon sopivan avaimen tai jonkin muun turvalaitteen avulla ja joka on paikasta vastuussa olevien toimivaltaisten henkilöiden valvoma. SRX100 Services Gateway General Safety Guidelines and Warnings...
  • Page 113 Ett område med begränsat tillträde får endast tillträdas av servicepersonal med ett speciellt verktyg, lås och nyckel, eller annan säkerhetsanordning, och kontrolleras av den auktoritet som ansvarar för området. Preventing Electrostatic Discharge Damage to the Services Gateway SRX100 Services Gateway General Safety Guidelines and Warnings...
  • Page 114 Figure 16: Placing a Component into an Electrostatic Bag SRX100 Services Gateway Definition of Safety Warning Levels on page 91 Related Topics SRX100 Services Gateway Fire Safety Requirements on page 96...
  • Page 115 NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire at or near a Juniper Networks services gateway. If a dry chemical fire extinguisher is used, the unit is no longer eligible for coverage under a service agreement.
  • Page 116 Waarschuwing Om lichamelijk letsel te voorkomen wanneer u dit toestel in een rek monteert of het daar een servicebeurt geeft, moet u speciale voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel stabiel blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheid te verzekeren: SRX100 Services Gateway Installation Safety Guidelines and Warnings...
  • Page 117 Les directives ci-dessous sont destinées à assurer la protection du personnel: Le rack sur lequel est monté le Juniper Networks services gateway doit être fixé à la structure du bâtiment. Si cette unité constitue la seule unité montée en casier, elle doit être placée dans le bas.
  • Page 118 Le seguenti direttive vengono fornite per garantire la sicurezza personale: Il Juniper Networks services gateway deve essere installato in un telaio, il quale deve essere fissato alla struttura dell'edificio. Questa unità deve venire montata sul fondo del supporto, se si tratta dell'unica unità...

  • Page 119: Laser And Led Safety Guidelines And Warnings

    Para garantizar su seguridad, proceda según las siguientes instrucciones: El Juniper Networks services gateway debe instalarse en un bastidor fijado a la estructura del edificio. Colocar el equipo en la parte inferior del bastidor, cuando sea la única unidad en el mismo.

  • Page 120: General Laser Safety Guidelines

    Aviso Produto laser de classe 1. ¡Atención! Producto láser Clase I. Varning! Laserprodukt av klass 1. Class 1 LED Product Warning WARNING: Class 1 LED product. Waarschuwing Klasse 1 LED-product. SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings...

  • Page 121: Laser Beam Warning

    ópticos. ¡Atención! No mirar fijamente el haz ni observarlo directamente con instrumentos ópticos. Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska instrument. SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings...

  • Page 122: Radiation From Open Port Apertures Warning

    Varning! Osynlig strålning kan avges från en portöppning utan ansluten fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte stirra in i oskyddade öppningar. SRX100 Services Gateway Installation Safety Guidelines and Warnings on page Related Topics SRX100 Services Gateway Maintenance and Operational Safety Guidelines and...

  • Page 123: Safety Guidelines And Warnings

    ¡Atención! Existe peligro de explosión si la batería se reemplaza de manera incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el equivalente recomendado por el fabricante. Desechar las baterías gastadas según las instrucciones del fabricante. SRX100 Services Gateway Maintenance and Operational Safety Guidelines and Warnings...

  • Page 124: Jewelry Removal Warning

    (incluindo anéis, fios e relógios). Os objectos metálicos aquecerão em contacto com a corrente e em contacto com a ligação à terra, podendo causar queimaduras graves ou ficarem soldados aos terminais. SRX100 Services Gateway Maintenance and Operational Safety Guidelines and Warnings...

  • Page 125: Lightning Activity Warning

    Operating Temperature Warning WARNING: To prevent the services gateway from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 104 F SRX100 Services Gateway Maintenance and Operational Safety Guidelines and Warnings...
  • Page 126 40 C. Ettei ilmanvaihto estyisi, tuuletusaukkojen ympärille on jätettävä ainakin 15,2 cm tilaa. Attention Pour éviter toute surchauffe des routeurs de la gamme Juniper Networks services gateway, ne l'utilisez pas dans une zone où la température ambiante est supérieure à 40 C. Pour permettre un flot d'air constant, dégagez un espace d'au moins 15,2 cm autour des ouvertures de ventilations.

  • Page 127: Product Disposal Warning

    Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets alla lagar och föreskrifter. SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on Related Topics page 101 SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 109...

  • Page 128: In Case Of Electrical Accident

    SRX100 Services Gateway Electrical and Power Requirements on page 23 Related Topics SRX100 Services Gateway Maintenance and Operational Safety Guidelines and...

  • Page 129: Srx100 Services Gateway Compliance Statements For Emc

    EN-61000-4-4 (2004) Electrical Fast Transients EN-61000-4-5 (2006) Surge EN-61000-4-6 (2007) Immunity to Conducted Disturbances EN-61000-4-11 (2004) Voltage Dips and Sags SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 109 Related Topics SRX100 Services Gateway Compliance Statements for EMC Requirements on page 112...

  • Page 130: Requirements

    SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Compliance Statements for Environmental Requirements on page 113 SRX100 Services Gateway Compliance Statements for EMC Requirements Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

  • Page 131: Requirements

    The batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC, and 98/101/EEC. The product documentation includes instructional information about the proper method of reclamation and recycling. SRX100 Services Gateway Compliance Statements for EMC Requirements on Related Topics page 112...
  • Page 132 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Compliance Statements for Environmental Requirements...

  • Page 133: Srx100 Services Gateway Power Guidelines, Requirements, And Specifications

    Guidelines, Requirements, and Specifications This appendix includes the following sections: SRX100 Services Gateway Site Electrical Wiring Guidelines on page 115 SRX100 Services Gateway Power Specifications and Requirements on page 116 SRX100 Services Gateway Site Electrical Wiring Guidelines Table 32 on page 115 describes the factors you must consider while planning the electrical wiring for the services gateway at your site.
  • Page 134 CAUTION: To comply with intrabuilding lightning/surge requirements, the intrabuilding wiring must be shielded. The shielding for the wiring must be grounded at both ends. General Site Guidelines for Installing the SRX100 Services Gateway on page 19 Related Topics Monitoring the SRX100 Services Gateway Power System on page 84...
  • Page 135 Services Gateway on page 22 SRX100 Services Gateway Site Electrical Wiring Guidelines on page 115 Site Preparation Checklist for the SRX100 Services Gateway on page 17 Monitoring the SRX100 Services Gateway Power System on page 84 Maintaining the SRX100 Services Gateway Hardware Components on page 77...
  • Page 136 SRX100 Services Gateway Hardware Guide SRX100 Services Gateway Power Specifications and Requirements...

  • Page 137: Srx100 Services Gateway Interface Cable Specifications And Connector Pinouts

    RJ-45/RJ-45 100Base-T operation connectors RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port on page Related Topics RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page SRX100 Services Gateway Front Panel and Back Panel Views on page 6...

  • Page 138: Rj-45 Connector Pinouts For The Srx100 Services Gateway Ethernet Port

    Interface Cable and Wire Specifications for the SRX100 Services Gateway on Related Topics page 119 RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port The port on the front panel labeled console is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management).
  • Page 139 Clear to Send Interface Cable and Wire Specifications for the SRX100 Services Gateway on Related Topics page 119 RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port on page RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port...
  • Page 140 SRX100 Services Gateway Hardware Guide RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port...

  • Page 141: Contacting Customer Support And Returning The Srx100 Services Gateway Hardware

    Contacting Customer Support to Obtain a Return Materials Authorization on page 125 Return Procedure for the SRX100 Services Gateway To return an SRX100 Services Gateway or component to Juniper Networks for repair or replacement: Determine the part number and serial number of the device or component. See “Locating the SRX100 Services Gateway Component Serial Number and Agency...
  • Page 142 Power Supply 0 SRX100 Services Gateway Chassis Serial Number and Agency Labels The SRX100 Services Gateway has a serial number ID and agency labels on the bottom of the chassis as shown in Figure 19 on page 125. Locating the SRX100 Services Gateway Component Serial Number and Agency Labels...
  • Page 143 Appendix D: Contacting Customer Support and Returning the SRX100 Services Gateway Hardware Figure 19: Location of SRX100 Services Gateway Serial Number and Agency Labels Return Procedure for the SRX100 Services Gateway on page 123 Related Topics Contacting Customer Support on page 126...

  • Page 144: Packing The Srx100 Services Gateway And Components For Shipment

    Related Topics Locating the SRX100 Services Gateway Component Serial Number and Agency Labels on page 124 Packing the SRX100 Services Gateway and Components for Shipment on page Contacting Customer Support on page 126 Contacting Customer Support Once you have located the serial numbers of the device or component, you can return the device or component for repair or replacement.
  • Page 145 Appendix D: Contacting Customer Support and Returning the SRX100 Services Gateway Hardware To pack the services gateway for shipment: Retrieve the shipping carton and packing materials in which the device was originally shipped. If you do not have these materials, contact your Juniper Networks representative about approved packaging materials.
  • Page 146 SRX100 Services Gateway Hardware Guide Required Tools and Parts for Installing and Maintaining the SRX100 Services Related Topics Gateway on page 29 Locating the SRX100 Services Gateway Component Serial Number and Agency Labels on page 124 Information You Might Need to Supply to Juniper Networks Technical Assistance...

  • Page 147: Index

    Part 5 Index Index on page 131 Index...
  • Page 148 SRX100 Services Gateway Hardware Guide Index...
  • Page 149 Index braces, in configuration statements......xv brackets Symbols angle, in syntax descriptions........xiv #, comments in configuration statements....xv square, in configuration statements......xv ( ), in syntax descriptions..........xv < >, in syntax descriptions........xiv [ ], in configuration statements........xv { }, in configuration statements........xv cables | (pipe), in syntax descriptions........xv console port cable (chassis), connecting..62, 65...
  • Page 150 SRX100 Services Gateway Hardware Guide settings for modem connection at device for Ethernet cable remote CLI access..........64 connecting the services gateway to a management settings for modem connection for remote CLI device............61, 62 access...............66 connecting the services gateway to a modem..65...
  • Page 151 J-Web quick configuration See quick configuration network settings............57 JTAC................126 defining..............56 information required...........125 overview...............55 requesting support..........125 Network Time Protocol (NTP)........55 Juniper Technical Assistance Center See JTAC notice icons..............xiii JUNOS CLI NTP server connecting locally..........62 defining (configuration editor)......70 connecting remotely..........62 defining (quick configuration).......67 JUNOS Software establishing secure Web access......74...
  • Page 152 SRX100 Services Gateway Hardware Guide Power LED..............11 RJ-45 pinouts monitoring............81 console port............120 status..............84 fast ethernet port..........120 power supply RJ-45 to DB-9 serial port adapter connecting............45 chassis console port..........65 maintenance............77 root password power system at initial local connection (none)......62 monitoring............84 at initial remote connection (none).......66 requirements............116...
  • Page 153 Index SSL access.............74 tools..............29 wall unpacking.............31 installing...............43 use................3 wall installation verifying parts............32 preparing..............37 wall installation.............43 wall mount services gateway features preparing..............37 High Memory............4 warnings Low Memory............4 electrical.............109 services gateway, packing for shipment.....126 wire specifications.............119 setup configuration editor..........70 quick configuration..........67 show chassis commands show chassis alarms..........79 show chassis environment........79 show chassis fpc...........79...
  • Page 154 SRX100 Services Gateway Hardware Guide Index...

Table of Contents