Unpacking The Srx1400 Services Gateway; Required Tools And Parts For Unpacking The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

CHAPTER 4
Unpacking the SRX1400 Services
Gateway

Required Tools and Parts for Unpacking the SRX1400 Services Gateway

Related
Documentation

Unpacking the SRX1400 Services Gateway

Copyright © 2011, Juniper Networks, Inc.
This chapter includes the following topics:
Required Tools and Parts for Unpacking the SRX1400 Services Gateway on page 47
Unpacking the SRX1400 Services Gateway on page 47
Verifying Parts Received with the SRX1400 Services Gateway on page 49
To unpack the SRX1400 Services Gateway and prepare for installation, you need a Phillips
(+) screwdriver, number 2.
Installation Overview for the SRX1400 Services Gateway on page 51
Site Preparation Checklist for the SRX1400 Services Gateway on page 41
Unpacking the SRX1400 Services Gateway on page 47
Verifying Parts Received with the SRX1400 Services Gateway on page 49
The SRX1400 Services Gateway is shipped in a cardboard carton. Getting Started
installation instructions and an accessory box are also included in the shipping carton.
NOTE: The services gateway is maximally protected inside the shipping
carton. Do not unpack it until you are ready to begin installation.
Figure 18 on page 48 shows the SRX1400 Services Gateway in a shipping carton.
To unpack the services gateway:
Move the shipping carton to a staging area as close to the installation site as possible,
1.
where you have enough room to remove the components from the chassis.
Position the shipping carton with the arrows pointing up.
2.
47