Srx1400 Services Gateway Hardware Components - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Components

Copyright © 2011, Juniper Networks, Inc.
Overview of the SRX1400 Services Gateway Common Form-Factor Modules on page 11
Table 8 on page 13 lists the various components, and the maximum number of each,
that can be installed in the SRX1400 Services Gateway.
Table 8: SRX1400 Services Gateway Hardware Components
Hardware
Component Minimum Required
Routing Engine 1
Network and Services 1
Processing Card
(NSPC)
I/O card (IOC) 0
(Optional)
System I/O card 1
(SYSIOC)
Power supply 1
Fans 1
NOTE: You can use single-wide Network Processing Card (NPC) and Service
Processing Card (SPC) as an alternative to NSPC. For more details, see
"SRX3000 Series Services Gateway Cards Supported on SRX1400 Services
Gateway" on page 209.
Table 9 on page 13 provides minimal configuration details for the SRX1400 Services
Gateway models in order to have an operational system.
Table 9: SRX1400 Services Gateway Minimal Configuration
Model Number
SRX1400BASE-GE-AC
SRX1400BASE-GE-DC
SRX1400BASE-XGE-AC
Chapter 2: SRX1400 Services Gateway Hardware Components
Maximum Allowed
1
1
1
1
2
1
Minimal Configuration
1-Gigabit Ethernet SYSIOC + 1 Routing Engine + 1 AC power
supply + 1 NSPC*
1-Gigabit Ethernet SYSIOC + 1 Routing Engine + 1 DC power
supply + 1 NSPC*
10-Gigabit Ethernet SYSIOC + 1 Routing Engine + 1 AC power
supply + 1 NSPC*
Slot
RE0
CFM 1 and CFM 3
CFM 2
Slot 0
PEM 0 and PEM 1
Fan Tray Assembly
13