Related
Documentation
Copyright © 2011, Juniper Networks, Inc.
Figure 29: CONSOLE Cable Connector
Plug the female DB-9 end into the device's serial port.
2.
Proceed with grounding and powering on the device.
3.
You can start performing Initial software configuration on the SRX1400 Services
Gateway after the device is up.
Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management
on page 73
SRX1400 Services Gateway Software Configuration Overview on page 85
Performing Initial Software Configuration on the SRX1400 Services Gateway (CLI
Procedure) on page 86
Chapter 8: Connecting the SRX1400 Services Gateway
75