Juniper SRX1400 Hardware Manual page 46

SRX1400 Services Gateway Hardware Guide
26
Table 18: Routing Engine LED Indicators (continued)
LED Label Color
Green
STATUS
Red
Green
HDD
Packet Forwarding Engine Controller Function
STATUS Green
Red
Table 19 on page 26 describes the Routing Engine behavior that occurs when the buttons
on its front panel are pressed.
NOTE: The ONLINE button on Routing Engine does not perform any function
and currently it is not supported.
Table 19: Routing Engine Front Panel Buttons
Button Label Operation
ROUTING ENGINE Pressing this button resets the Routing Engine.
RESET
PFE CONTROLLER Pressing this button resets the Packet Forwarding Engine controller
RESET function.
PFE CONTROLLER Unused in this release.
FAILOVER
Table 20 on page 27 describes the Routing Engine front panel connectors.
Status Indicated Behavior
On steadily The Routing Engine is operating normally.
Blinking The Routing Engine is booting.
On steadily The Routing Engine has failed and is not
operating normally.
Blinking The Routing Engine hard disk drive is being
accessed.
Off There is no hard disk drive activity.
On steadily The Packet Forwarding Engine controller
is operating normally.
Blinking The Packet Forwarding Engine controller
is booting.
On steadily The Packet Forwarding Engine controller
has failed and is not operating normally.
Copyright © 2011, Juniper Networks, Inc.