Juniper SRX1400 Hardware Manual page 211

Copyright © 2011, Juniper Networks, Inc.
Appendix B: SRX1400 Services Gateway Power Guidelines, Requirements, and Specifications
60320. The plug at the male end of the power cord fits into the power source receptacle
that is standard for your geographical location.
Table 49 on page 191 provides specifications and Figure 57 on page 191 depicts the plug
on the AC power cord provided for each country or region.
Table 49: AC Power Cord Specifications
Country Model Number
Australia CBL-JX-PWR-AU
China CBL-JX-PWR-CH
Europe (except CBL-JX-PWR-EU
Italy and United
Kingdom)
Italy CBL-JX-PWR-IT
Japan CBL-JX-PWR-JP
North America CBL-JX-PWR-US
United Kingdom CBL-JX-PWR-UK
Figure 57: AC Plug Types
WARNING: The AC power cord for the services gateway is intended for use
with the SRX1400 Services Gateway only and not for any other devices.
WARNING: The attached power cable is only for this product. Do not use the
cable for another product.
NOTE: In North America, AC power cords must not exceed approximately
14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code
(CEC) Section 4-010(3). You can order AC power cords that are in compliance.
Electrical Specification Plug Type
250 VAC, 10 A, 50 Hz AS/NZ 3112–1993
250 VAC, 10 A, 50 Hz GB2099.1 1996 and
GB1002 1996
(CH1-10P)
250 VAC, 10 A, 50 Hz CEE (7) VII
250 VAC, 10 A, 50 Hz CEI 23–16/VII
125 VAC, 12 A, 50 Hz or 60 JIS 8303
Hz
125 VAC, 10 A, 60 Hz NEMA 5-15
250 VAC, 10 A, 50 Hz BS 1363A
191