Verifying Parts Received With The Srx1400 Services Gateway - Juniper SRX1400 Hardware Manual

SRX1400 Services Gateway Hardware Guide
Related
Documentation
210
Table 52: SRX3000 Series Services Gateway Cards Supported on
SRX1400 Services Gateway
Card
NPC
SPC
16-Port Copper Ethernet/Fast
Ethernet/Gigabit Ethernet IOC
16-Port SFP Gigabit Ethernet IOC
2-Port XFP 10-Gigabit Ethernet IOC
NOTE: The Routing Engine and Power Supply Units (AC and DC) are not
interoperable between the SRX1400 Services Gateway and the SRX3000
and SRX5000 Series Services Gateway.
NOTE: The NPCs, SPCs, and IOCs are not provided with the SRX1400 Services
Gateway. You must order them separately. Contact your Juniper Networks
customer service representative for more information.
You can either use an NSPC or combination of SRX3000 Series Services
Gateway Network Processing Card (NPC) and Services Processing Cards
(SPC), with a double wide tray holder on the SRX1400 Services Gateway for
the device to operate properly.
To install the NPC and SPC on the SRX1400 Services Gateway, you must
order the double wide tray holder (SRX1K3K-2CFM-TRAY) to hold two
single-wide CFMs (NPC and SPC). Contact your Juniper Networks customer
service representative for more information.
Network Processing Cards on page 211
Services Processing Cards on page 212
Verifying Parts Received with the SRX1400 Services Gateway on page 49
Installing a Network Processing Card in an SRX1400 Services Gateway on page 214
Installing a Services Processing Card in an SRX1400 Services Gateway on page 216
Model Number
SRX3K-NPC
SRX3K-SPC
SRX3K-16GE-TX
SRX3K-16GE-SFP
SRX3K-2XGE-XFP
Copyright © 2011, Juniper Networks, Inc.
Slot on SRX1400
Services Gateway
CFM3
CFM1
CFM2
CFM2
CFM2