Collect Device Health Data And Set The Sample Interval - Digi IX10 User Manual

Central management
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
13. (Optional) Configure the IX10 device to communicate with remote cloud services by using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination drm_phone_number
(config)>
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
1. (Optional) Configure the IX10 device to communicate with remote cloud services by using an
HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
b. Set the hostname of the proxy server:
(config)> cloud drm proxy host hostname
(config)>
c. (Optional) Set the port number on the proxy server that the device should connect to. The
default is 2138.
(config)> cloud drm proxy port integer
(config)>
14. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
15. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Collect device health data and set the sample interval

You can enable or disable the collection of device health data to upload to Digi Remote Manager, and
configure the interval between health sample uploads. By default, device health data upload is
IX10 User Guide
Collect device health data and set the sample interval
512