Digi IX10 User Manual page 64

Interfaces

Command line
1. Log into the IX10 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modem
To view a status summary for the modem:
n
> show modem
Modem
-----
modem
>
To view detailed status and statistics, use the
n
> show modem name modem
modem: [Telit] LM940
---------------------------------------------------------------------
---------
IMEI
Manufacturer
Model
FW Version
Revision
Status
------
State
APN
Signal Strength
Bars
Access Mode
Temperature
IP address (IPv4)
Gateway (IPv4)
SIM
---
SIM Slot
SIM Status
IMSI
ICCID
SIM Provider
>
IX10 User Guide
command:
SIM Status
------------- ---------
1 (ready) connected
: 781154796325698
: Telit
: LM940
: 24.01.541_ATT
: 24.01.541
: connected
: 1234
: Good (-85 dBm)
: 2/5
: 4G
: 34C
: 10.200.1.2
: 10.200.1.1
: 1
: ready
: 21685216482134
: 26587956542156312312
: AT&T
Wireless Wide Area Networks (WWANs)
APN Signal Strength
--------- --------------------
1234 Good (-84 dBm)
show modem name name command:
64