Clear Captured Data - Digi IX10 User Manual

Diagnostics

Clear captured data

To clear captured data traffic in RAM, use the

Command line
1. Log into the IX10 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Type the following at the Admin CLI prompt:
> analyzer clear name capture_filter
>
where capture_filter is the name of a packet capture configuration. See
capture for the network analyzer
To determine available packet capture configurations, use the ?:
> anaylzer clear name ?
name: Name of the capture filter to use.
Format:
test_capture
capture_ping
> anaylzer clear name
Note You can remove data traffic saved to a file using the
IX10 User Guide
analyzer clear command:
for more information.
rm command.
Analyze network traffic
Configure packet
554