Show Serial Status And Statistics - Digi IX10 User Manual

Serial port
iv. (Optional) Enable mDNS. mDNS is a protocol that resolves host names in small
networks that do not have a DNS server.
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show serial status and statistics

To show the status and statistics for the serial port:

WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections, click Serial.

Command line
1. Log into the IX10 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX10 User Guide
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------
-----------------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config serial USB_port)>
Repeat this step to list additional firewall zones.
(config serial USB_port)> service ssh mdns enable true
(config serial USB_port)>
Show serial status and statistics
120