Digi IX10 User Manual page 358

Applications
should be used with caution. As a result, support for this functionality is disabled by default on Remote
Manager.
Enable support on Digi Remote Manager for uploading custom device names
1. In Remote Manager, select Documentation > API Explorer.
2. For Path, type /ws/v1/settings/inventory/AllowDeviceToSetOwnNameEnabled.
3. For HTTP Method, select POST.
4. In the HTTP message body text box, type the following:
{
"name" : "AllowDeviceToSetOwnNameEnabled",
"value" : "true"
}
5. Click Send.
Upload a custom name
1. Log into the IX10 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.10 (default, Jan 31 2020, 08:45:19)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the name submodule:
>>> from digidevice import name
4. Upload the name to Remote Manager:
>>> name.upload("my_name")
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Help for upload the device name to Digi Remote Manager
Get help for uploading the device name to Digi Remote Managerby accessing help for
digidevice.name:
1. Log into the IX10 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
IX10 User Guide
Digidevice module
358