Display Status And Statistics Using The Show Command; Show Config - Digi IX10 User Manual

Command line interface
Transfer a file from the IX10 device to a remote host
To copy a file from the IX10 device to a remote host, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the IX10 device.
n
For example:
To copy a support report from the IX10 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report /etc/config/
Saving support report to /etc/config/support-report-0040D0133536-20-12-02-
8:44:23.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/etc/config/support-report-00:40:D0:13:35:36-20-12-02-8:44:23.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-20-12-02-8:44:23.bin
>

Display status and statistics using the show command

The IX10 show command display status and statistics for various features.
For example:

show config

The show config
changed from the default settings. This is a particularly useful when troubleshooting the device.
> show config
auth tacacs+ service "login"
auth user admin password
"$2a$05$WlJQhquI7BgsytkpobKhaeLPtWraGANBcrlEaJX/wJv63JENW/HOu"
add auth user test
add auth user test group end "admin"
add auth user test group end "serial"
auth user test password
"$2a$05$RdGYz1sLKbWrqe6cZjlsd.otg03JZR6n9939XV6EYWUSP0tMAzO5W"
network interface lan ipv4 type "dhcp"
IX10 User Guide
command displays all the configuration settings for the device that have been
Display status and statistics using the show command
scp command as follows:
572