Digi IX10 User Manual page 118

Serial port
iv. (Optional) Enable mDNS. mDNS is a protocol that resolves host names in small
networks that do not have a DNS server.
(config serial USB_port)> service telnet mdns enable true
(config serial USB_port)>
i. Configure ssh access to this port:
i. Enable ssh access:
(config serial USB_port)> service ssh enable false
(config serial USB_port)>
ii. Set the ssh port:
(config serial USB_port)> service ssh port port
(config serial USB_port)>
iii. (Optional) Configure the access control list to limit access to the ssh connection:
IX10 User Guide
To limit access based on firewall zones:
n
(config serial USB_port)> add service telnet acl zone end
value
Where value is a firewall zone defined on your device, or the any keyword.
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config serial USB_port)> ... firewall zone ?
Zones: A list of groups of network interfaces that
can be referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------
-----------------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config serial USB_port)>
Repeat this step to list additional firewall zones.
Configure the serial port
118