Allow Remote Access For Web Administration And Ssh - Digi IX10 User Manual

Services

Allow remote access for web administration and SSH

By default, only devices connected to the IX10's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
The IX10 device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See Set the idle timeout for IX10 users
n
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service

WebUI
1. Log into the IX10 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
5. Select External.
6. Click Apply to save the configuration and apply the change.
IX10 User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity timeout for
257