Ix10 User Authentication; User Authentication Methods - Digi IX10 User Manual

User authentication

IX10 user authentication

User authentication on the IX10 has the following features and default configuration:
Feature
Idle timeout
Allow shell
Methods
Groups
Users
TACACS+
RADIUS
LDAP

User authentication methods

Authentication methods determine how users of the IX10 device are authenticated. Available
authentication methods are:
IX10 User Guide
Description
Determines how long a user session can be idle before the
system automatically disconnects.
If disabled, prevents all authentication prohibits access to the
shell prompt for all authentication groups. This does not
prevent access to the Admin CLI.
Note If shell access is disabled, re-enabling it will erase the
device's configuration and perform a factory reset.
Determines how users are authenticated for access: local
users , TACACS+ , or RADIUS .
Associates access permissions for a group. . You can modify the
released groups and create additional groups as needed for
your site. A user can be assigned to more than one group.
Defines local users for the IX10 .
Configures support for TACACS+ (Terminal Access Controller
Access-Control System Plus) servers and users.
Configures support for RADIUS (Remote Authentication Dial-In
User Service) servers and users.
Configures support for LDAP (Lightweight Directory Access
Protocol) servers and users.
IX10 user authentication
Default
configuration
10 minutes.
n
Enabled.
n
local users.
n
admin:
n
Provides the
logged-in user
with
administrative
and shell
access.
serial:
n
Provides the
logged-in user
with access to
serial ports.
admin:
n
Belongs to
both the
admin and
serial groups.
Not
n
configured.
Not
n
configured.
Not
n
configured.
369