Digi IX10 User Manual page 542

Hide thumbs Also See for IX10:

Table of Contents

ii. To disable informational messages for the DHCP server:

(config)> system log event dhcpserver info false

iii. To change the status interval:

(config)> system log event dhcpserver status_interval value

where value is any number of weeks, days, hours, minutes, or seconds, and takes the

format number{w|d|h|m|s}.

For example, to set the status interval to ten minutes, enter either 10m or 600s:

(config)> system log event dhcpserver status_interval 600s

6. (Optional) See

servers to which log messages will be sent.

7. Save the configuration and apply the change:

(config)> save

Configuration saved.

8. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

IX10 User Guide

Configure syslog servers

for information about configuring remote syslog

Configure options for the event and system logs

Show Quick Links

Table of Contents