Digi IX10 User Manual page 48

Interfaces
1. Log into the IX10 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new interface or select an existing one:
To create a new interface, see
n
To edit an existing interface, click to expand the appropriate interface.
n
5. After creating or selecting the interface, click IPv4 (or IPv6) > SureLink.
6. Enable SureLink.
SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WWAN (Modem). It is disabled for IPv6.
7. Enable Reboot device.
Note If both the Restart interface and Reboot device parameters are enabled, the Reboot
device parameter takes precedence.
8. Click to expand Test targets.
9. For Add Test Target, click .
10. Select the Test type:
Ping test: Tests connectivity by sending an ICMP echo request to the hostname or IP
n
address specified in Ping host. You can also optionally change the number of bytes in
the Ping payload size.
DNS test: Tests connectivity by sending a DNS query to the specified DNS server.
n
HTTP test: Tests connectivity by sending an HTTP or HTTPS GET request to the URL
n
specified in Web servers. The URL should take the format of http[s]://hostname/
[path].
Test DNS servers configured for this interface: Tests connectivity by sending a DNS
n
query to the DNS servers configured for this interface.
IX10 User Guide
Wireless Wide Area Networks (WWANs)
Configure a Wireless Wide Area Network (WWAN).
48