Digi IX10 User Manual page 211

Virtual Private Networks (VPN)
1. Log into the IX10 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Add an OpenVPN authentication group:
a. Click Authentication > Groups.
b. For Add Group, type a name for the group (for example, OpenVPN_Group) and click .
The new authentication group configuration is displayed.
c. Click OpenVPN access to enable OpenVPN access rights for users of this group.
d. Click to expand the OpenVPN node.
e. Click  to add a tunnel.
f. For Tunnel, select an OpenVPN tunnel to which users of this group will have access.
g. Repeat to add additional OpenVPN tunnels.
IX10 User Guide
OpenVPN
211